Recommended tools:
5/16” socket,
Extension bar,
Torque wrench
1 / 10 (English)
400A & 600A
Mechanism Replacement Kit
Installation Instructions
Turn off and lock out all power supplying this device before
working on this device.
Replace all covers before power supplying this device is
turned on.
Couper l'alimentation de l'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoir soit alimenté.
Tensión peligrosa.
Puede causar la muerte o lesiones graves.
Tension dangereuse.
Danger de mort ou risque de blessures graves.
Hazardous Voltage.
Will cause death or serious injury.
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
Turn off and lock out all power supplying this device before
working on this device.
Replace all covers before power supplying this device is
turned on.
Couper l'alimentation de l'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoir soit alimenté.
Tensión peligrosa.
Puede causar la muerte o lesiones graves.
Tension dangereuse.
Danger de mort ou risque de blessures graves.
Hazardous Voltage.
Will cause death or serious injury.
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
I.L. No. 508533A00
Use only with Siemens certified components.
NOTE
- These instructions do not purport to cover all details or
variations in equipment, or to provide for every possible
contingency to be met in connection with installation, operation
or maintenance. Should further information be desired or
should particular problems arise, which are not covered
sufficiently for the purchaser’s purposes, the matter should be
referred to the local Siemens sales office. The contents of this
instruction manual shall not become part of or modify any prior
or existing agreement, commitment or relationship. The sales
contract contains the entire obligation of Siemens. The
warranty contained in the contract between the parties is the
sole warranty of Siemens. Any statements contained herein do
not create new warranties or modify the existing warranty.
TRADEMARKS
- Unless otherwise noted, all names identified
by ® are registered trademarks of Siemens AG or Siemens
Industry, Inc. The remaining trademarks in this publication may
be trademarks whose use by third parties for their own
purposes could violate the rights of the owner.
Cat. #: HM656A
Item: HM656A
For use with: 400A & 600A VBII Safety Switches,
Series “A”
Handle Grommet (1)
Type 3R, 12 & 4X
units only
Interlock Grommet (1)
Type 3R, 12 & 4X
units only
Sealing washer (4)
Type 4X units only
#10 – 32 x .312”L (4)
Mechanism Mounting Screws
All Unit Types
Mechanism (1)
All Unit Types
