background image

SERVICE MANUAL

SHARP CORPORATION

WIRING DIAGRAMS ..............................................................1
WIRE CONNECTION DIAGRAM ...........................................2
WATER FLOW & REFRIGERATION DIAGRAMS..................3
OPERATION GUIDE ..............................................................4
PRECAUTIONS ......................................................................6
ASSEMBLY DRAWING ..........................................................7
EXPLODE DRAWINGS ..........................................................8
SANITIZING AND CLEANING, SPECIFICATION ..................9
TROUBLE SHOOTING ...........................................................11
HOW TO CHANGE PARTS ....................................................12

SWD-78EHL-SL

MODEL:

HOT & COLD HIDDEN BOTTLE

WATER COOLER

In the interests of user-safety (Required by safety regulations

in some countries) the set should be restored to its original 

condition and only parts identical to those specified should 

be used.

CONTENTS

Parts marked with "      " are important for maintaining the safety of the set. Be sure to 

replace these parts with specified ones for maintaining the safety and performance of the set.

This document has been published to be used for 

after sales service only.

The contents are subject to change without notice.

 SELF CLEANING

ALKALINE FILTER

Summary of Contents for SWD-78EHL-SL






















Reviews: