LOCKING WHEEL NUT REMOVAL SET 10pc
Model no:
SX272.V2
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAfETy
WARNING!
DO NOT
use the tool if damaged or thought to be faulty.
WARNING!
ensure that Health & Safety, local Authority Regulations and general workshop practice Regulations are adhered to
when using tools.
WARNING!
If jacking up a vehicle refer to manufactures instructions for vehicle and jack.
8
DO NOT
use the tool for a task it is not designed to perform.
8
DO NOT
use worn, or damaged sockets.
8
DO NOT
use the tool unless you have been instructed in its use by a qualified person.
8
DO NOT
operate the tool if you are tired or under the influence of alcohol, drugs or intoxicating medication.
9
Maintain the tool in good condition.
9
Follow all workshop safety rules, regulations and conditions.
9
Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
9
Keep children and non essential persons away from the working area.
2. INTRODUCTION
Conical shaped design allows socket to fit over locking/wheel nut. Socket is hammered onto nut using the punch, so nut and socket wedge
together. nut can then be removed with a breaker bar or impact wrench. Set also includes drift to remove nut from socket.
3. SpECIfICATION
Model No:
..............................................................................................................
SX272.V2
drive: .........................................................................................
19mm and 22mm Hex Drive
19mm Maximum Internal Sizes:
.............................................................. Ø18, 19, 20, 21mm
22mm Maximum Internal Sizes
..................................................................... Ø23, 24, 25mm
SX272.V2 Issue 1 22/05/18
Original Language Version
© Jack Sealey limited
Refer to
instructions
Wear eye
protection
Wear protective
gloves
