*P513-174*
P513-174
B-Series Single Cylinder
Lock
Parts Included
• (2) Keys
• (1) Cylinder
• (1)
M\zn
”
(11 mm) ring &
hardened steel insert
• (1)
Z\,
”
(3 mm) ring &
hardened steel insert
• (1) Driver bar
• (1) Latch
• (2) Mounting screws,
cylinders
• (1) Strike
• (1) Strike dust box
• (1) Strike reinforcer
• (2) 3” (76 mm) mounting
screws, reinforcer
• (4) Mounting screws, latch
and strike
• (1) Thumbturn
Depending on size ordered, may include (2)
Z\,
”
(3 mm) rings and
hardened steel inserts.
NOTE:
Hollow metal doors must be properly reinforced for latch
support. If door reinforcement is not furnished, contact door
manufacturer, or use Schlage reinforcer #37-001 (specify door
thickness)
1
Select rings and inserts.
Use chart to choose rings and inserts for door thickness
adjustment.
Door Thickness
5 Pin Cylinder
6 Pin Cylinder
1C\,
”
(35 mm)
B and A
B and (2) A
1C\v
”
(44 mm)
B
B and A
A
B
5 Pin
6 Pin
Ring Insert
Ring Insert
1C\zn
”
(30 mm)
1B\zn
”
(33 mm)
5 Pin
6 Pin
1C\,
”
(35 mm)
door
1C\v
”
(44 mm)
door
1C\,
”
(35 mm)
door
1C\v
”
(44 mm)
door
2
Prepare the door.
2a Mark centerline on door face and edge.
2b Place template on door and drill a
1Z\x
”
(38 mm)
hole through the door face (from both sides to avoid
damaging wood).
Drill a
1
”
(25 mm) hole in door edge. Drill
C\,
”
(10 mm) deeper
as illustrated.
C\,
”
(10 mm) deeper
1
”
(25 mm) Hole
1Z\x
”
(38 mm) Hole
3
Install latch.
3a Rotate to adjust latch so that bolt faces door jamb.
3b Insert latch into hole. Line up and trace around
faceplate.
Use chisel to remove wood until the faceplate fits flush when latch
is fully inserted.
Installation Instructions
Model B250PD
