![background image](http://html.mh-extra.com/html/sargent/ec200/ec200_manual_1199050001.webp)
Sargent Electrical Services Ltd.
Copyright 2005
Issue 03
Page 1 of 11
12 May 2005
1 INTRODUCING THE EC200 ELECTRONIC CONTROL SYSTEM
With the use of new technology and an innovative approach to user interfacing, the EC200 Power
Control System provides a complete control solution for a wide range of leisure vehicles.
The microprocessor controlled digital system allows the user to control equipment and view / edit
system information from a user-friendly control panel that incorporates a liquid crystal ‘
ALPHA-
NUMERIC
’
display.
The built in ‘intelligence’ prevents over discharge of the vehicle battery, allows greater control of the
water system and has a built in alarm clock / event timer to control equipment in the absence of the
user. With the addition of an optional plug-in remote control pack the Power and Auxiliary functions
can be operated by a key fob controller.
The system meets relevant UK legislation, including the requirements of BS7671, EN1648-1 and -2.
Further technical data is contained in section 5.
2 SYSTEM OVERVIEW
The following diagram shows the components that make-up the EC200 system. The system basically
comprises a Power Supply and control Unit (PSU2007) that houses the Mains 240v protection
equipment, a 200 watt 12v charger / power supply, and power control / protection for the 12v
equipment. The PSU2007 is connected to a Digital Control Panel via a data cable.
PSU 2007
12v LEISURE
BATTERY
12v VEHICLE
BATTERY
REMOTE
PACK
12v
EQUIPMENT
240v
EQUIPMENT
240v
IN
SENSOR
INPUTS
CONTROL PANEL
EC200
TEMP
EC200 ELECTRONIC CONTROL SYSTEM
EC200