background image

CD-ROM DRIVE
SC-152

User's Guide - ENGLISH

BG68-00326C   Rev:01

FCC Compliance

This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be 
deter-mined by turning the equipment off and on, the user is encouraged to 
try to correct the interference by one or more of the following measures:

• Re-orient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

http://www.samsungodd.com

www.samsungelectronics.com

1

Safety Precautions

The following diagrams illustrate the precautions to be taken when using
your CD-ROM drive. 

You must not use the drive in any manner other than that specified in this guide.

Avoid exposing your eyes or skin to direct or scattered radiation.

CAUTION

Do not attempt to repair the CD-ROM drive yourself. Contact
your dealer or local SAMSUNG representative for all repairs.
If you make any adjustments or perform any operations other
than those specified in this guide, you run the risk of exposure to
hazardous radiation.

WARRANTY Please refer to the Samsung limited warranty statements.

Precautions

1. To reduce the risk of fire or electric shock, do not expose

this appliance to rain or moisture.

2. Always check each disc for cracks before using it. If there are

cracks on the surfaces, especially around the border of the
center hole, we recommend that you make a copy of the disc
immediately and then stop using it. If you continue using the
disc, it will probably develop more cracks and eventually cause
irreparable damage.

3. Do not use poor quality discs:

From unknown sources

● 

Without any copyright

Scratched or damaged in any way

Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment

Summary of Contents for SC-152









Reviews: