Dear Customer,
We tried to achieve two targets when developing this product.
The first was to produce the best quality heater on the market.
The second was to produce the most cost-effective heater. We
feel that we have achieved these two objectives however we
would be delighted to hear from you if you have any comments.
Thank you for purchasing one of the products in our range. We
wish you many enjoyable warm hours.
Yours Sincerely
Chairman
The 13kW patio heater is made by Universal Innovations to an
exacting quality standard and is covered by the following guarantee:
THIS PRODUCT IS FULLY GUARANTEED FOR 2 YEARS,
REGARDING PROPER USE.
This guarantee does not affect your statutory rights in any way.
HELPLINE Dublin Ireland
00 353 1 2873797
IF YOU NEED ANY ASSISTANCE PLEASE DO NOT HESITATE
TO CONTACT US DIRECTLY AT THE FACTORY. DO NOT BRING
GOODS BACK TO PLACE OF PURCHASE.
13kW Heat Focus Patio Heater
Assembly & User Instructions
New & Improved
2 Burner Gas Barbecue
13kw Patio Heater
For more information, contact Universal Innovations
w: www
.uig.biz p:
(00 353) (1) 2873797 e:
This appliance is designed for external use only using Pr
opane (G31) gas at a supply
pressur
e of 37 millibar and must be serviced by a competent person in accor
dance
with the instructions included. Please read all accompanying documentation car
efully.
Technical Specifications:
Overall Height:
2.13 meters approximately
.
Gas Category:
I3+
Overall Width:
865 millimetres appr
oximately.
Heat input(·Qn):
13 KW Net. ( 44356 BTU/H )
Control V
alve:
Combined gas valve and flame failure device.
Setting Pressur
e:
37mbar
Main Burner T
ype:
Pressed steel venturi.
Injector Size:
1.82
mm
Regulator Outlet Pressur
e
+ Type:
37mbar (27mm clip on)
Servicing Procedur
e:
Servicing to be carried out by qualified gas technician, every 100 hours of use.
• Remove regulator fr
om cylinder.
• Remove reflector “Parasol” Assembly
.
• Remove “Burner” for examination and cleaning.
• Vigor
ously wire brush mesh inside and out to r
emove any clogging deposits.
• Remove windshield guard to expose main bur
ner assembly.
• Examine, clean or replace main injector
, ignition electrode, thermocouple and gas
pipe O ring as requir
ed. During storage, particularly, insects or for
eign matter may
get into gas line/nozzle. Ensure that the gas line is completely clear befor
e use.
Note: Ther
e are a number of ways to check the gas for leaks. W
e recommend a leak
detector spray or soapy water applied onto the joints with a small paint brush be used.
Leaks can be seen as small bubbles at the outlet point. DO NOT check for leaks using
a naked flame. Check the condition of the hose monthly and each time the cylinder
is changed. If the hose is in any way degraded, replace it immediately with the same
specification of hose. Hose length must be 150cm.
The product is fully guaranteed for 2 years r
egarding pr
oper use.
For servicing contact your local gas supplier or phone
Calor Direct U.K. 0800 662 663. Universal Innovations Helpline 00 353 1
2873797
For further information on the heater and its parts, please contact the factory dir
ect.
Helpline Hours, 9am - 5pm Mondays to Fridays. 00 353 1 2873797.
We ar
e located at: Universal Innovations.
Kilcoole Industrial Estate, Kilcoole, Co. Wicklow, Ir
eland.
GUARANTEE
OTHER PRODUCTS IN OUR RANGE
TECHNICAL & SERVICING INFORMA
TION
0086
