![background image](http://html1.mh-extra.com/html/robopec/reeti/reeti_quick-start-manual_1470979001.webp)
robopec
This document is the property of Robopec. The information contained herein may not be used, reproduced or
communicated without its prior written consent.
Quick start guide
About this guide :
This simplified guide is limited to provide the main instructions to help you easily start your Reeti.
You can find more information about the Reeti and his interface in ''Settings-> Help'' as well as on the
website
www.reeti.fr
where you will find references, examples, tutorials, FAQ, Forum and Support
.
Read and follow carefully the instructions for use before using Reeti. They are available in the
file named ''Regulations, Guarantee''. Robopec is not responsible for failure to follow
these instructions.
1.
Connections
Do not tilt Reeti while in operation and do not access the connection of Reeti while he is on
or plugged to power supply
.
Never connect a bare wire or connector different than expected. Reeti must be connected to
the electrical standards.
Reeti’s connections are under his base. Place it gently on the back on a flat surface, protected and
clean for access.