Installation Sheet
LTE-XPOL-001
790-960 / 1710-2170 / 2500-2700 MHz
LTE MIMO OMNI-DIRECTIONAL ANTENNA
Thank you for purchasing this RFI antenna. This antenna provides an innovative and future proof solution for 4G /
3G and 2G networks. It incorporates two separately fed ultra wideband elements in a single housing which provide
Multiple Input/Multiple Output (MIMO) for the networks of today and tomorrow.
The weatherproof housing is designed for window, pole or wall mounting and comes with dual 5m low loss cables
terminated with SMA male connectors.
Copyright RF Industries Pty Ltd 2012. Subject to change without notice.
INS 41170-1
rfiwireless.com.au
1
n
1 x antenna with dual 5m low loss cables terminated
with SMA male connectors
n
1 x mounting bracket
n
1 x hose clamp
n
4 x suction cups
n
4 x suction cup mounting pins
n
4 x wall screws
INSTALLING THE ANTENNA
Mounting Location
To get optimum performance from the antenna it should be mounted as high as possible, clear of any obstructions.
For
maximum signal, we recommend external mounting to reduce signal losses caused by building structures etc.
CONTENTS
Before installing your antenna, please check that the kit includes
all the following components.
n
Window suction
n
Wall mounting
n
Pole mounting
n
Place each of the four suction cups through the holes in the
bracket.
n
Insert the suction cup pins from the front of the bracket into the
holes.
The antenna is supplied with a bracket (see picture 1) which allows for 3
different mounting options:
Window mounting
Suction cup
pin:
PICTURE 1
Suction cup
