• Dimensions:
20W: L: 620 x W: 105 x D: 200mm
25W: L: 1500 x W: 105 x D: 160mm
• LED: 96pcs/168pcs of 0.2W 2835
• Working Temperature: -10°C - 40°C (0°C - 40°C for emergency
version)
SPECIFICATION
BOX CONTENTS
• 110V LED Non-Corrosive Head
INTRODUCTION
The 110V LED Tripod Head
is designed to fit onto the
Collapsible Tripod Base (sold
separately). The LED Head comes in
20W and 25W and comes complete with a
16A 110V plug and 2 x 110V sockets to add
additional light fittings or power tools.
INS
TALLA
TION INS
TRUCTIONS
110V LED NON-CORROSIVE HEADS
FOR TRIPOD BASE
FOR MODEL: LFS220, LFS220E, LFS525 & LFS525E
Red Arrow Trading
Elsworth House, Herries Road South
Sheffield, S6 1QS
T: 0800 195 0006 F: 0870 195 0006
www.redarrowtrading.com
SAFETY WARNING
• The installation should be carried out by a qualified electrician in compliance with the current edition
of the IEE Wiring Regulations.
• Prior to installation carry out the necessary risk assessment considering the people who could be at
risk, the level of risk and the precautions required to control the risk.
• Ensure that the circuit supply is isolated either by the circuit supply fuse being removed or the
applicable circuit breaker being turned off before installation or any maintenance.
• Check the total load on the circuit including the luminaire does not exceed the rating of the circuit
cable, fuse or circuit breaker.
• If the fitting incorporates control gear, ensure careful sizing to avoid instances of nuisance tripping of
the protective device used in the installation.
•
Follow the provided installation instructions, using the fixings supplied or recommended.
110V
1800lm/
2200lm
LED
4000K
80 Ra
IP65
50Hz
20W/
25W
210917