2
- Turn the thumb screw on the side of the knuckle joint
to adjust the angle of the shade up or down as desired.
- This shade does not twist.
RIDDLE SINGLE
FLOOR LAMP
- Lacquered brass shade should be wiped with a soft duster.
- Coloured parts can be wiped with a damp cloth
(unplug from mains first).
- 1 x G9 LED bulbs
www.bertfrank.co.uk
+44 (0)207 164 6482
INSTALLATION
MAINTENANCE
TECHNICAL
1
4
3
- The arm of the lamp does not move vertically. It does
rotate.
- To adjust rotation angle firstly loosen the tightening blocks.
- Ensure that the arm of the light is supported as
this is carried out.
- Position the base at the end of the stem and secure
by inserting the Hex bolt through the base into the stem.
- Tighten securely with provided Alan Key.
- Gently lying the lamp stem and arm on a soft surface,
unscrew hex bolt from end of stem with Alan
Key provided.
!!
!!
Be sure not
to over loosen.