background image

Manual-1

OPERATORS  MANUAL

PE 15

PARAMETRIC EQUALIZER

QUICK START

If all else fails, read the manual. Yeah, yeah. But nothing is going to fail and you, being one smart cookie, don’t need

to read the stupid manual. But you should read this section just to cover your affairs. So, quickly, here goes.

The PE 15 has few hidden gotchas. One of these may be the shelving feature of Bands 1 and 5. Remember that

pulling on the bandwidth (

BW

) knob causes it to come forward with a positive click, indicating the Shelf Mode is active.

Use Shelving Bands 1 and 5 like Bass and Treble tone controls, where you want control over the whole top or bottom
ends of the spectrum.

Hook-up is simple. The PE 15 accepts all combinations of balanced or unbalanced, XLR, ¼" TRS or TS connectors.

However, note the 

INPUT

 connectors are wired in parallel and may not be used together. 

Use only one at a time. They

will not function as a summing type of Input for two different sources, but they may be 

used in a daisy chain fashion

to feed other units. On the other hand (to randomly pick a hackneyed expression), you may use the paralleled

 OUTPUTs

to drive two destinations.

Never connect anything except a Rane approved AC power supply to the thing that looks like a red telephone jack

on the rear of the PE 15.

WEAR PARTS:

 This product contains no wear parts.

Reviews: