![background image](http://html1.mh-extra.com/html/quadra-fire/explorer-iii-exp-iii-apac/explorer-iii-exp-iii-apac_installation-and-operating-instrucitons_3432618001.webp)
Page 1
1 May, 2019
7038-201G
Page 1
7038-201G
19 January, 2018
5700 STEP TOP ACC WOOD BURNER INSTALLATION AND OPERATING INSTRUCTIONS
INSTALLATIONS TO COMPLY WITH AS/NZS2918:2001
AND WILL REQUIRE A BUILDING CONSENT
IMPORTANT: Read all instructions carefully before starting installation. Failure to follow these
.
• Fig. 3,4 and Table 1 & 2 relate to installations with
AS/NZS 2918:2001 -
Appendix F
, with a ceiling angle between 0° - 30°
inclusive.
• For installations with a ceiling angle greater than
30°, refer to Fig. 6 & 7 and
AS/NZS 2918:2001
4.6.3(b)
• Ceiling Plate may vary in size depending on ceil-
ing angle. Please specify ceiling pitch prior to
ordering the ceiling plate.
• Quadra-Fire 5700 Step Top ACC wood burner’s
are tested and approved to the N.Z. National Envi-
ronmental Standards;
Model:
57ST-ACC-AU
•
-
mable vapors and liquids in the vicinity of
this or any other appliance.
•
• Comply with all minimum clearances to
-
WARNING
If the information in these instruc-
could result causing property dam-
age, personal injury, or death.
WARNING
Fire Risk.
For use with solid wood fuel only.
gases (i.e. carbon monoxide).
Page 1
7038-201G
19 January, 2018
5700 STEP TOP ACC WOOD BURNER INSTALLATION AND OPERATING INSTRUCTIONS
INSTALLATIONS TO COMPLY WITH AS/NZS2918:2001
AND WILL REQUIRE A BUILDING CONSENT
IMPORTANT: Read all instructions carefully before starting installation. Failure to follow these
.
• Fig. 3,4 and Table 1 & 2 relate to installations with
AS/NZS 2918:2001 -
Appendix F
, with a ceiling angle between 0° - 30°
inclusive.
• For installations with a ceiling angle greater than
30°, refer to Fig. 6 & 7 and
AS/NZS 2918:2001
4.6.3(b)
• Ceiling Plate may vary in size depending on ceil-
ing angle. Please specify ceiling pitch prior to
ordering the ceiling plate.
• Quadra-Fire 5700 Step Top ACC wood burner’s
are tested and approved to the N.Z. National Envi-
ronmental Standards;
Model:
57ST-ACC-AU
•
-
mable vapors and liquids in the vicinity of
this or any other appliance.
•
• Comply with all minimum clearances to
-
WARNING
If the information in these instruc-
could result causing property dam-
age, personal injury, or death.
WARNING
Fire Risk.
For use with solid wood fuel only.
gases (i.e. carbon monoxide).
EXPLORER III ACC WOOD BURNER INSTALLATION AND OPERATING INSTRUCTIONS
Model:
EXP-III-APAC
1
7060-264A
March 12, 2018
FRONT PAGE
Explorer III Wood Appliance
Model(s):
EXP-III-MBK-JP
EXP-III-PFT-JP
EXP-III-PMH-JP
WARNING
If the information in these instruc-
tions is not followed exactly, a
fire may result causing property
damage, personal injury, or death.
• Do not store or use gasoline or other flam
-
mable vapors and liquids in the vicinity of
this or any other appliance.
• Do not over fire - If appliance or chimney
connector glows, you are over firing. Over
firing will void your warranty.
• Comply with all minimum clearances to
combustibles as specified. Failure to
comply may cause house fire.
HOT SURFACES!
Glass and other surfaces are hot
during operation AND cool down.
Hot glass will cause burns.
•
Do not touch glass until it is cooled
•
NEVER allow children to touch glass
•
Keep children away
•
CAREFULLY SUPERVISE children in same room as
fireplace.
•
Alert children and adults to hazards of high temperatures
•
High temperatures may ignite clothing or other
flammable materials.
•
Keep clothing, furniture, draperies and other flammable
materials away.
WARNING
WARNING
Fire Risk
For use with solid wood fuel only.
Other fuels may over fire and generate
poisonous gases (i.e. carbon monoxide).
Installation Manual
Installation & Appliance Set-Up
INSTALLER: Leave this manual with party responsible for use and operation.
OWNER: Retain this manual for future reference.
NOTICE: DO NOT DISCARD THIS MANUAL
NOTE
To obtain a French translation of this manual, please contact
your dealer or visit www.quadrafire.com
Pour obtenir une traduction française de ce manuel, s’il vous
plaît contacter votre revendeur ou visitez www.quadrafire.com
Installation and service of this appliance should be performed by
qualified personnel. Hearth & Home Technologies recommends
HHT Factory Trained or NFI certified professionals.
Page 1
7038-201G
19 January, 2018
5700 STEP TOP ACC WOOD BURNER INSTALLATION AND OPERATING INSTRUCTIONS
INSTALLATIONS TO COMPLY WITH AS/NZS2918:2001
AND WILL REQUIRE A BUILDING CONSENT
IMPORTANT: Read all instructions carefully before starting installation. Failure to follow these
.
• Fig. 3,4 and Table 1 & 2 relate to installations with
AS/NZS 2918:2001 -
Appendix F
, with a ceiling angle between 0° - 30°
inclusive.
• For installations with a ceiling angle greater than
30°, refer to Fig. 6 & 7 and
AS/NZS 2918:2001
4.6.3(b)
• Ceiling Plate may vary in size depending on ceil-
ing angle. Please specify ceiling pitch prior to
ordering the ceiling plate.
• Quadra-Fire 5700 Step Top ACC wood burner’s
are tested and approved to the N.Z. National Envi-
ronmental Standards;
Model:
57ST-ACC-AU
•
-
mable vapors and liquids in the vicinity of
this or any other appliance.
•
• Comply with all minimum clearances to
-
WARNING
If the information in these instruc-
could result causing property dam-
age, personal injury, or death.
WARNING
Fire Risk.
For use with solid wood fuel only.
gases (i.e. carbon monoxide).
EXP-III-APEC-EXPLORER III Hardwood Certified
Particulate Emissions = 1.1 g/kg Space Heating Efficiency = 63%