Connect the Weighing Platform
(e)
connector into the COM PORT
on the rear of the machine. Then connect the LAN Cable
(f)
and
Power Cable
(g)
to either side of the machine.
7
Open the cover. Place the Meter
(i)
into the meter compartment and
push backwards until it slots into position. Close the cover.
3
Machine components:
Machine Base
Feed Table with
Sealing Unit
Catch Tray
Weighing Platform
LAN Cable
Power Cable
Meter
Ink
Cartridge
Unpack all components from the box, remove packaging
and any transit tape.
1
Lift machine slightly on the left hand side and align the hooks to attach the Feed
Table
(b)
– align the catch tray to the right hand side of the machine
(c).
5
Lower Weighing Platform release panel at rear
of the machine. Place Weighing Platform
(d)
on
top of the machine and slide forward to lock. Lift
panel to secure and clip cable into place.
Insert the Ink Cartridge
(h)
into the machine with the ‘TOP’ and ‘LOCK’
stickers facing upwards. Push the Ink Cartridge
(h)
towards the back of
the machine until you hear a ‘click’ - close the cover of the machine.
Turn on the machine using the switch behind the
Power Cable
(g)
and follow the steps on screen.
8
Select LAN and press ‘OK’ to test connection type.
OK
Installation Process
1 LAN
9
Obtain registration PIN from MyQuadient.
Registration PIN
www.myquadient.co.uk
10
IN-360 Series Base
Quick Installation Guide
For more help with your installation, please visit:
kb.quadient.co.uk/in360
Lift the cover of the machine to reveal the
Ink Cartridge
(h)
and Meter
(i)
locations.
2
6
4
Press the
button and credit the meter.
Credit
Credit available
£100.00
Amount of credit to add
£10
13
Press OK to start the alignment test and pass a blank envelope
through the machine, then choose the straightest line. Continue
to follow the steps on screen to complete the installation.
11
A C E G I K
B D F H J
OK
Back
Headset alignment
Perform an imprint test
Adjust alignment
Select the letter corresponding to the best
verticle line
B D F H J
A C E G
I
K
14
Your machine is now ready to use. Please turn over
for your Quick User Guide.
Remove tabs from
print heads before
inserting into unit!
