USE AND INSTALLATION MANUAL
0001268 edition: 1/22.03.2021
Page
1
of
8
EN 1496:2017/B
Machine Directive
2006/42/EC
RUP503-U
RESCUE LIFTING DEVICE
Figure 1 - Overview
TABLE OF CONTENTS:
1.
GENERAL DESCRIPTION
...............................................
1
2.
LOAD LIMIT AND STRENGTH
........................................
1
3.
TRANSPORT AND WEIGHT
...........................................
2
4.
MAINTENANCE AND STORAGE
....................................
2
5.
TIME OF USAGE
...............................................................
2
6.
PERIODIC INSPECTIONS
...............................................
2
7.
TABLE NO. 1 - POSSIBLE INSTALLATION OF
DEVICE RUP503-U
.....................................................................
3
8.
OVERALL DIMENSIONS
..................................................
3
9.
MARKING
............................................................................
4
10. INSTALLATION OF RUP503-U
.......................................
5
11. GENERAL SAFETY RULES
............................................
6
12. ESSENTIAL PRINCIPLES FOR USE OF PERSONAL
FALL PROTECTION EQUIPMENT
...........................................
6
13. WARRANTY
.......................................................................
7
14. IDENTITY CARD
................................................................
8
1. GENERAL DESCRIPTION
Rescue lifting device RUP503-U can be used as a
component of rescue equipment. With use of the device a
victim can be ascended from a lower onto a higher level or
descended from a higher to a lower level. The descending
distance cannot exceed 2 m.
BASIC TECHNICAL DATA
Working Load Limit
200kg
Required hand force
10kg
Gear ratio
7.2:1
Lever length
300mm
Rope diameter
6.3mm
Weight
25m rope – 22.5kg
35m rope – 24.0kg
45m rope – 25.5kg
50m rope – 26.2kg
The device RUP503-U is formed by:
a) general winch with reel on which work rope of 6.3mm
in diameter is wound. The device is fitted with holder
UTB (AT017-330),
b) for spring-type energy absorber SDW with
connectors AZ011,
c) detachable part of crank (for transportation of the
device). The device RUP503-U can be mounted on
various devices using universal holders. Please
refer to Table 1.
2. LOAD LIMIT AND STRENGTH
a) GENERAL INFORMATION
Minimum Breaking Strength (MBS): 21kN
.
The device can be loaded with work force along the profile
to which it is fixed as shown in Figure 2.
The maximum load that could be transmitted in service
from the device to the static construction – 10kN.
If the device is used as a part of a fall arrest system,
the user must be equipped with an element limiting
maximum dynamic forces applied on user while arresting
a fall to max. 6kN.
The device can be used
to descend personnel
above the 2-meter limit
by means of an
additional WR / CR /
CRW retractable type
fall arrester to arrest a
fall.
