Thank you for choosing PROJOY products.
Please read carefully before installation.
PEBS-S INSTRUCTIONS FOR
DOC: PZ-DT-05-01
INSTALLATION AND OPERATION
INSTALLATION
DISASSEMBLY
PROJOY PEBS-S products are mounted on standard din-rails and are suitable for 35mm standard din-
rail installation. No additional tools are required for installation. Simply push the product into the guide
rail. For operation, please hang the hook at the top of the bottom into the guide rail to make the product
30°. Then, press the product diagonally downwards to snap the product into the guide rail, and the final
product will be vertical as shown in the right figure.
PROJOY PEBS-S products are quick-release design and can be easily disassembled with a single
screwdriver. The details are as follows:
First insert the screwdriver into the opening at the bottom of the product buckle, use the product as a
fulcrum, and then withdraw the buckle downward. When you hear a click, the buckle will automatically
stop at the fixed position, and the product is separated from the guide rail. The bottom of the product is
first separated from the guide rail to form an angle of about 30°, and then slightly raised, and the upper
hook is separated from the guide rail to take out the product.
Priority snapping
into the din-rail
Press the product diagonally
downwards to snap the
buckle into the guide rail
Bottom buckle
