Porsche Turbo 2007 Driver Manual Download

Page: 1 / 347

Porsche, the Porsche Crest, Cayenne, Tiptronic

and Tequipment are registered trademarks of

Dr. Ing. h.c. F. Porsche AG.
Printed in Germany.
Reprinting, even of excerpts, or duplication of any

type is only permissible with the written authorisa-

tion of Dr. Ing. h.c. F. Porsche AG.
© Dr. Ing. h.c. F. Porsche AG

Porscheplatz 1

D-70435 Stuttgart
48268

On-board literature

Please always keep this literature in the vehicle

and please hand it over to the new owner if you

sell your vehicle.

Suggestions

Do you have any questions, suggestions or ideas

for your vehicle or for the on-board literature?

Please write to us:
Dr. Ing. h.c. F. Porsche AG

Vertrieb Customer Relations

Porschestraße 15–19

71634 Ludwigsburg

Equipment

Because our vehicles undergo continuous devel-

opment, equipment and specification may not be

as illustrated or described in this Driver's Manual.
Items of equipment are sometimes optional or

vary depending on legal requirements or on the

country in which the vehicle is sold. Your Porsche

partner will be pleased to advise you on retrofit-

ting such equipment.
Should your Porsche be fitted with any equipment

not described in this Manual, your Porsche partner

will be glad to provide information concerning

correct operation and care of the items

concerned.
Because of different legal requirements in

individual countries, the equipment in your vehicle

may vary slightly from that described in this

Driver's Manual.

WKD 948 820

08/07

Summary of Contents for Turbo 2007




























































































































































































































































































































































Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands

Porsche Turbo 2007, Driver Manual

Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands