background image

ICA-HM127

ICA-HM127

Quick Guide

Quick Guide

2011-AB5620-000

PLANET Technology Corporation

Tel: 886-2-2219-9518  

Fax: 886-2-2219-9528

Email: [email protected]   

www.planet.com.tw

11F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)

PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of

their respective owners. Copyright © 2011 PLANET Technology Corp.  All rights reserved.

VERIFY THE CONTENTS INSIDE PACKAGE BOX

The package should contain the items plus ICA-HM127. If any item is missing or damaged, please contact the seller immediately.

Quick Installation Guide

Step 2a. Connecting Network

Step 3. Computer Network Setup

Set your computer’s IP address to 192.168.0.x, where x is a number between 1 to 253 
(except 20 where is being used for the camera by default). If you don’t know how to do 
this, please ask your network administrator.

In the ICA-HM127 can be configured without external power, if connecting to an IEEE 802.3af powered Ethernet switch.

Fasten the Lens with IP Camera

NOTE :

 Use only the power adapter shipped with the unit to ensure correct functionality

Use web browser (Internet Explorer 6.0 or above) to connect to 

192.168.0.20 

(type this 

address in the address bar of web browser).
You’ll be prompted to input user name and password: 

admin

 / 

admin

.

Further Configuration  

For detail configuration, please check user’s manual on the bundled CD.

Step 4. Login Prompt

Power Adapter 

Accessories

Lens 

Stand

ICA-HM127

Ethernet Switch

User PC

(192.168.0.X)

Step 1. Connecting Lens

CD-ROM

Camera Rear Panel

Step 2b. Connecting Power via PoE interface and Network

ICA-HM127

Ethernet PoE Switch

User PC

(192.168.0.X)

x 3

x 3

Description

Output  video  signal,  connect  to  external  video 

devices

Connect to DC power adapter output

Connector Digital  input  /  output  dry  contacts. 

Connects to external peripherals by wire. See next 

page for pin definitions.

Item 

Description

D+ 

RS485 signal positive (+)

D- 

RS485 signal negative (-)

GND 

Signal ground

DO 

Digital Output #1

DI1 

Digital Input #1 

DI2 

Digital Input #2

AC24V- 

AC 24V power input negative (-)

AC24V+ 

AC 24V power input positive (+)

WARNING: DO NOT CONNECT POWERED 

CABLE!

Description

When  the  IP  camera  is  not  functioning  properly, 

you can use a pen or similar object to press this 

reset button to reset the IP camera. You can also 

press and hold this button for more than 5 seconds 

to clear all settings of IP camera, include adminis-

trator password, then the IP camera will download 

default setting automatically.

Inserts SD card for video recording. 

Maximum 32GB of SD-HD card supported.

Adjust the DC lens driving ability

Connect  to  your  local  area  network  by  Ethernet 

cable.

Left LED: Power indicator

Right LED: Data transfer

Connects to external audio amplifier to output 

voice. Use 3.5mm audio cable.

Connects to external microphone to input audio 

signal to  IP camera. Use 3.5mm audio cable.

Item

1. VIDEO OUT

2. DC 12V* 

3. DI/DO    

    Connector

Item

4. RESET

 
5. SD

6. DC lens drive 

7. ETHERNET 

8. AUDIO OUT 

9. MIC IN

 

NOTE :

 For "C-mount lens", the adapter must installed. For "CS-mount " the lens can use directly. 

*

Note :

 ICA-HM127 can be powered either by 12VDC or IEEE 802.3af Power over Ethernet.

6. DC Lens Drive

7. LAN Socket

9. MIC IN

8. Audio Out

1. Video Out

3. DI / DO Connector

4. Reset Button

5. SD Card Slot

2. Power Connector

DC 12V

VIDEO OUT

ETHERNET

RESET

SD

AUDIO OUT

MIC IN

- D +

- D -

- GND

- DO

- D

I1

- D

I2

- AC24V-

- AC24V+

RS485

Отзывы: