DU-PH-0062-60 Rev A 7/16/07 GCX Corp Page 1 of 7
Installation Guide
Philips MP2/MP5 Roll Stand
The purpose of this guide is to:
1. Describe assembly of Roll Stand (pages 2 – 3).
2. Describe attachment of Fixed Tilt Mounts (page 4).
3. Describe mounting MP5 on Roll Stand (page 5).
4. Describe mounting MP2 on Roll Stand (page 6).
5. Describe cable management – MP2 only (page 7).
WARNING:
USE OF THIS ROLL STAND FOR INSTRUMENTS OTHER THAN THOSE DESCRIBED IN
THIS DOCUMENT MAY RESULT IN INJURY DUE TO TIPPING OF THE ROLL STAND. THE CUSTOMER
SHOULD VERIFY THE STABILITY OF ANY DEVIATION FROM THE CONFIGURATIONS SHOWN.
Parts Reference
The following parts and hardware are included with this installation kit (hardware not shown):
Tools Required:
Phillips screwdriver (not provided), 1/2'' [13mm] wrench (not provided).
Item #
Description
Qty
1 Post,
40''
1
2 Base,
21''
1
3
5/16-18 x 1'' Hex Head Cap Screw (HHCS)
1
4
5/16 Flat Washer
1
5
5/16 Split Lock Washer
1
6 Utility
Basket
1
7 Basket
Clip
2
8
#8-32 x 7/8'' Pan Head Machine Screw (PHMS)
2
9
#8-32 Hex Nut
2
10 Handle
1
11
#10-32 x 9/16'' PHMS
4
12
Fixed Tilt Mount, MP5
13
Fixed Tilt Mount, MP2
1
14
M4 x 14mm PHMS
2
15
#10-32 x 3/4'' Flat Head Machine Screw (FHMS)
3
16
Power Supply Mount
1
17
M4 x 12mm PHMS
2
18
M6 x 10mm FHMS
3
19
M6 x 8mm PHMS
2
20
Cable Clip (not shown – see page 7)
2
21
Screw Cover, Adhesive-backed Lexan
1
1
10
12
6
2
13
16
