I N S T A L L A T I O N I N S T R U C T I O N S
CHIEF MANUFACTURING INC.
8805-000097 REV. B
1-800-582-6480
952-894-6280 FAX 952-894-6918
2004 Chief Manufacturing
8401 EAGLE CREEK PKWY, STE. 700
www.chiefmfg.com
SAVAGE, MINNESOTA 55378 USA
10/04
PLASMA DISPLAY STATIC MOUNT
PSM-2540
(1) Bracket, Plasma Mounting, Static
(1) Latching Flag
(4) Screws, M8 x 30mm Button Head Cap
(1) 10-24 x .5 FH Undercut Screw
(4) Mounting Buttons, Nylon stepped, pan style
(1) Nylon Washer
(1) Allen Key, 5mm
(1) 10-24 Nylock Nut
BEFORE PROCEEDING:
Unpack the carton, verify contents shown in Figure 1 and read
installation instructions completely. If you are missing any of the listed components, please
contact Customer Service at 1-800/582-6480.
Plasma Displays are Extremely Fragile.
1. Attach four mounting buttons to display using four M8 x 30mm button head cap screws
provided (see Figure 2
)
.
2. Secure latching flag to Plasma Static Mount using one 10-24 x .5 FH undercut screw, one
Nylon washer, and one 10-24 Nylock nut (see Figure 3).
CAUTION!
Figure 1
ALL COMPONENTS MUST BE SECURELY FASTENED TO A
STRUCTURAL MEMBER CAPABLE OF SUPPORTING 4 TIMES
THE COMBINED WEIGHT OF ALL COMPONENTS PLUS THE
EQUIPMENT BEING MOUNTED. IF IT CANNOT SUPPORT
THIS WEIGHT, THE STRUCTURE MUST BE REINFORCED.
THE MAXIMUM WEIGHT TO BE INSTALLED ON THE MOUNT
IS 175 POUNDS (79.38 KG).
WARNING!
