3/8/2018
40 CPR Quadrature Encoder - ENC4109_0 at Phidgets
https://www.phidgets.com/?tier=3&catid=64&pcid=57&prodid=1016
1/3
Checking the Contents
You should have received:
Plastic encoder cap
and base
Plastic encoder disk
Encoder PCB
Two screws
3035 - Encoder
Cable
In order to test your new Phidget you will also
need:
A motor with a rear shaft and compatible
mounting holes
A motor controller Phidget
A Phidget with an encoder input
Connecting the Pieces
Take the
plastic base,
the encoder
PCB, and
the two
screws.
Place the
PCB inside
the base in
the
orientation
shown
above so
that it fits in.
Place the
combined
base and
PCB on the
back of the
motor such
that the
mounting
holes line
up with the
holes in the
base. There
