Thank you for purchasing a
ViewPoint
™
Lazer light system. All
ViewPoint
™
light systems are con-
structed of the highest quality materi-
als, such as cold-forged aluminum
housings for durability, and halogen bulbs
with dichoric glass reflectors for the brightest possi-
ble beam. Your ViewPoint™ Lazer light system pro-
duces a clean light pattern for optimum visibility and is
easily recharged for continued night riding enjoyment.
Please save these instructions, as they contain important infor-
mation for taking care of your ViewPoint
™
Lazer.
Installation and Use
Note:
Be sure to fully charge battery before first use (see "Battery
Charging" section for details).
1. Attach the quick release handlebar clamp to your handlebar. Open the
Quick Release Clamp and close the clamp around your bar, with the
quick release lever facing rearward. Rotate the Quick Release Lever into
position on the lower part of the clamp (with the lever pointing down)
and then flip the Quick Release Lever upward to lock the clamp into posi-
tion (see Figure 1).
2. If the clamp diameter setting is too loose or too tight, open the quick
release lever, loosen or tighten the lever as necessary to adjust clamp
tightness, and close the lever to check for a secure grip on the bar.
Owner’s Manual
Lazer
Performance, Inc.
One Performance Way
Chapel Hill, NC 27514
PerformanceBike.com
0602_1
Also available for your Viewpoint
™
System
40-0339 NiMH battery charger (use only with NiMH battery)
00-2364 Replacement 6-watt bulb
Performance Tech Support 1(800)727-2453
9am-6pm EST Monday-Friday
