background image

10 TON HYDRAULIC RAM SYSTEM

OWNER’S MANUAL

Item Number W1651

WARNING

It is the owner and/or operators’ responsibility to study all WARNINGS, operating, and maintenance 

instructions contained on the product label and instruction manual prior to operation of this product. 

The owner/operator shall retain product instructions for future reference.
The owner and/or operator are responsible for maintenance, maintaining all decals or warning labels 

and while in use, maintaining the unit in good working order. If the owner and/or operator are not 

fluent in English, the product warnings and instructions shall be read and discussed with the 

operators’ native language by the purchaser/owner or his designee. Make sure that the operator 

comprehends its contents. Safety information shall be emphasized and understood prior to usage. 

The product shall be inspected per the operating instructions.
Users of this product must fully understand these instructions. Each person operating this product 

must also be of sound mind and body and must not be under the influence of any substance that 

might impair their vision, dexterity, or judgment.
Protect yourself and others by observing all safety information.
Failure to comply with instructions could result in personal injury and/or property damage! 

If you encounter any problems or difficulties, please contact our customer service department at:

1-

800-426-1262 between 6:30 a.m. and 4:30 p.m. Pacific time. 

Summary of Contents for W1651













Reviews: