Installation Guide
PDL Thermosafe Ceiling Sweep Fans
4HS1200WH, 4HS1400WH, 4HS1200SS, 4HS1400SS, 4JH1200WH,
4JH1400WH, 4JH1200SS, 4JH1400SS
IMPORTANT NOTES
1. To ensure proper balance, the blades are a matched set. Do
not mix-up the blades with those from another fan.
2. Transport and transit handling may loosen factory fitted cables.
Please check and secure terminal screws before installation.
PM-119PDLA Rev0
Thank you for purchasing this PDL Thermosafe Ceiling Sweep Fan. You can be assured of years of trouble free operation by
installing your ceiling fan carefully according to these instructions. Please read all the instructions before commencing, then
complete each step in order from one to eight.
INCLUDED WITH YOUR FAN
A. Motor Assembly
B. 4 x Blades
C. 3-Speed Fan Controller
D. Screw Pack
E. Mounting Bracket
F.
Instruction Sheet
Hangsure Bracket or J-Hook Bracket
PROTECTING THE FAN
Do not place the motor directly onto a flat surface.
The plastic nipple underneath the motor cannot support the weight
of the motor and may be easily damaged. When working on the
fan, place the motor on the foam packaging with the nipple located
in one of the recesses. This protects the nipple and the finish.
All electrical work must be carried
out by a qualified electrician.
CLEARANCES AND ANGLED CEILINGS
Hangsure Mounting
Suitable for pitched ceilings
with a maximum angle of 18.5˚.
CONTROLLING A SINGLE FAN
This fan has been supplied with a quality PDL 3 Speed Controller
that is designed to operate a single fan.
1
