background image

Contact Information:

Parker Hannifin Corporation

Refrigerating Specialties Division

2445 South 25th Avenue 
Broadview, IL 60155-3891

phone (708) 681-6300 
fax (708) 681-6306

www.parker.com/refspec

Rapid Purger

Product Bulletin 76-00 B

Type: V300

Purpose:

The V300 rapid purger from Parker 

is designed to safely and efficiently 

remove non-condensable gases 

from ammonia refrigeration systems. 

The V300 is an improvement over 

the successful V200 series and 

offers several new features and 

benefits.

The V300 is equipped with a 

RS-485 communication port for 

easy interface to controller data 

transmission. All of the parameters 

accessible via the HMI cable 

are now accessible via the serial 

channel. Further advancements 

include extended data logging time 

and password protection for factory 

calibration settings.

Like its predecessor the V200, the 

V300 can be used with 120 or 240 

VAC and can handle from 4 to 20 

purge points.

Product Features:

• Safety relief provision

• Made from 100% corrosion free 

components

• RS-485 communication capability

• Records purge cycles and purge 

time up to 12 weeks

• Password protection prevents 

tampering

• Multiple language display

• Factory calibrated for plug and play 

functionality

• Automatically adjusts vent 

pressures based on system 

conditions

• Proprietary microprocessor control 

for all sensing

• Includes 1/2" Globe-T SW isolation 

valves for the liquid, foul gas and 

suction lines

• Includes a 30"-150 psig ammonia 

gauge and encapsulated leaded 

coils

• Ammonia loss history

Summary of Contents for V300





































Reviews: