background image

Auto Purger Model V200

Product Bulletin 75-00 J

Contact Information:

Parker Hannifi n Corporation

Refrigerating Specialties Division

2445 South 25th. Avenue 
Broadview, IL 60155-3891

phone (708) 681-6300 
fax (708) 681-6306

www.parker.com

Pressure Rating:  21 bar (305 psig)

Purpose:

The Model V200 Auto Purger is 
a unique energy-saving device 
designed to effi ciently remove 
foreign non-condensable gases from 
ammonia refrigeration systems.

Product Features:

Smaller compact design with 

• 

equivalent capacity of our current 
model
Light weight 29.5 kg (65 lbs)

• 

Proprietary microprocessor control 

• 

for all sensing and control functions
Factory calibrated and wired

• 

Auto or manual cycling capabilities

• 

Up to 20 “Purge Points”

• 

Automatically adjusts vent pressures

• 

Energy saving sleep mode that 

• 

will activate with lack of non-
condensables
Electronic level, temperature, and 

• 

pressure monitoring for improved 
performance
Records number of purger cycles 

• 

and times for each purge point 
during a 7 day period
Purger is made of corrosion 

• 

resistant material

Summary of Contents for V200
















Reviews:

Related manuals for V200