background image

 

Operating Instructions

Replacement lamp unit

for DLP

®

 Projectors

 

Model No.

ET-LAD10000 (1 pc)

ET-LAD10000F (4 pcs)

Read these instructions completely before operating this unit.

Information for Users on Collection and Disposal of Old Equipment and used Batteries

Commercial Use

These symbols on the products, packaging, and/or accompanying documents mean that used 

electrical and electronic products and batteries should not be mixed with general household waste. 

For proper treatment, recovery and recycling of old products and used batteries, please take them to 

applicable collection points, in accordance with your national legislation and  the Directives 2002/96/

EC and 2006/66/EC.

By disposing of these products and batteries correctly, you will help to save valuable resources and 

prevent any potential negative effects on human health and the environment which could otherwise 

arise from inappropriate waste handling. 

For more information about collection and recycling of old products and batteries, please contact your 

local municipality, your waste disposal service or the point of sale where you purchased the items. 

Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.

For business users in the European Union

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for 

further information.

[Information on Disposal in other Countries outside the European Union]

These symbols are only valid in the European Union. If you wish to discard these items, please contact 

your local authorities or dealer and ask for the correct method of disposal.

Note for the battery symbol (bottom two symbol examples): 

This symbol might be used in combination with a chemical symbol. In this case it complies with the 

requirement set by the Directive for the chemical involved. 

LAD10000_ 社名変更 _E_080828.fm  1 ページ  2008年8月28日 木曜日 午後4時51分

Summary of Contents for ET-LAD10000

Page 1: ...t which could otherwise arise from inappropriate waste handling For more information about collection and recycling of old products and batteries please contact your local municipality your waste disposal service or the point of sale where you purchased the items Penalties may be applicable for incorrect disposal of this waste in accordance with national legislation For business users in the Europ...

Page 2: ... Be careful when handling a light source lamp The lamp unit has high internal pressure If improperly handled failure might result A used lamp unit may burst if it is handled violently For disposition of used lamps request an industrial waste disposal contractor If you continue to use a lamp after the replacement time the lamp may break Phillips screwdriver is necessary when replacing a lamp unit T...

Page 3: ...g never turn off the MAIN POWER switch nor unplug the projector from the outlet E Press the marked side of the MAIN POWER switch to remove all power from the projector JReplacement procedure 1 Be sure to observe the procedure Powering off the projector of the projector s Operating Instructions remove the power plug and confirm that the surroundings of the lamp unit have cooled off 2 Use a Phillips...

Page 4: ...he new filter provided as an accessory with the projector according to the replacement procedure given in the projector s Operating Instructions Cleaning and replacement of air filter Clean the air filter filter cleaning unit movable metal mesh filter and brush at the same time Static electric mesh filter Handle Lamp unit 2 Lamp unit 1 Lamp unit 3 Lamp unit 4 Fixing screws CAUTION The lamp unit an...

Reviews: