background image

1

GB

RF  SIGNAL INDICATOR

- Indicates the signal-receiving status of the unit

MAIN WINDOW

- Displays the current time with seconds or day-of-the week

SECONDARY WINDOW

- Displays the alarm time and its status or date

[  MODE/SET  ] button

- Changes between seconds and weekday display (Main
window) or between calendar and alarm clock display
(secondary window)
- Holds to activate the clock setting mode

[ UP ] button

- Increases the value of a setting by one unit

[ ZONE ] button

- Press to sequence through the 4 U.S. time-zones: Pacific,
  Mountain, Central or Eastern.

[ALARM] button

- Changes the display and operating status of the alarm
   clock

[RESET] button

- Returns all settings to the factory set default values

BATTERY INSTALLATION

1. Open the battery compartment by removing the screw at the

bottom of the unit.

2. Pull out the battery holder and insert two AAA-sized (UM-4)

batteries in accordance with the polarities shown.

3. Slide back the battery holder into the compartment and fasten

the screw.

4. Press RESET with a blunt stylus.

5. When the low battery indicator [         ] appears on the display,

follow the above procedures to replace the unit with new
batteries.

Note The unit will automatically search for the radio signal
when batteries are first installed.  When the BHM-612A is
new and just out of the box, allow up to 72 hours for the
unit to receive the US Atomic Clock signal.  To facilitate
reception, place the BHM-612A on a window sill away
from other signal emitting equipment such as TVs, radios,
PCs and microwaves.  Stronges signal reception is be-
tween midnight and 4AM.

INTRODUCTION

Congratulations on purchasing the BHM-612A Radio Controlled
Alarm Clock.

A smart-looking and easy-to-operate timepiece, the BHM-612A
is designed to automatically synchronize the current time and
date with the U.S. Atomic Clock.

The BHM-612A is also equipped with a daily alarm clock plus
date and multilingual weekday display.

FEATURES & KEY CONFIGURATION

RADIO CONTROLLED ALARM CLOCK

MODEL : BHM-612A

USER’S MANUAL

A

B

C

D

F

G

E

H

Summary of Contents for BHM-612A

Page 1: ...ities shown 3 Slide back the battery holder into the compartment and fasten the screw 4 Press RESET with a blunt stylus 5 When the low battery indicator appears on the display follow the above procedures to replace the unit with new batteries Note The unit will automatically search for the radio signal when batteries are first installed When the BHM 612A is new and just out of the box allow up to ...

Page 2: ...ALARM to display the alarm time Press ALARM to change the status of the alarm The respective indicator will appear When the alarm goes off the alarm sound will gradually increase in volume and speed The alarm will continue to sound for approximately two minutes unless interrupted when any button is pressed If the alarm is not interrupted after 2 minutes the alarm will silence itself and reactivate...

Page 3: ... circuit 3 Do not subject the unit to excessive force shock dust temperature or humidity Such treatment may result in malfunction a shorter electronic life span damaged batteries or distorted parts 4 Do not tamper with the unit s internal components Doing so will terminate the unit s warranty and may cause damage The unit contains no user serviceable parts 5 Only use new batteries as specified in ...

Page 4: ... 8883 or via email at helpme oscientific com WARRANTY This product is warranted to be free of manufacturing defects for a period of 1 year from date of retail purchase Defective product should be directed to the place of retail purchase for exchange Should this not be possible contact our customer care depart ment for assistance and a return material authorization No returns may be made without a ...

Reviews: