background image

 

ONePlus UPS

 

ONePlus UPS User Instruction Manual

 

ONePlus Series UPS

User Instruction Manual

 

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS.

 

Please read and save these instructions. This manual contains important 
instructions for the ONePlus UPS. Follow these instructions during the 
unpacking, installation and maintenance of the ONePlus UPS. If you have a 
problem with the unit, please refer to this manual before calling ONEAC 
Technical Services. 

 

Licenses and Trademarks

 

ONEAC, Virtual Kelvin Ground and MopUPS are all registered trademarks and 
ONePlus is a trademark of ONEAC Corporation. All other trademarks, product 
and corporate names are the property of their respective owners.

 

Entire contents copyright © 2004 ONEAC Corporation. All rights reserved. Reproduction in whole or 
in part without permission is prohibited. All information subject to change without notice.

 

913-577 Rev. -

12/04

 

ONEAC USA
27944 North Bradley Road
Libertyville, IL 60048-9700
USA

ONEAC EUROPE
George Curl Way
Southampton, Hampshire SO18 2RY
United Kingdom

Telephone: (847) 816-6000 
Toll Free: (800) 327-8801
Facsimile: (847) 680-5124

Telephone: +44 (0) 2380 610311
Facsimile:  +44 (0) 2380 612039

Summary of Contents for ONePlus Series


































Reviews: