Led Indicators And Wiring Instruction
5
Standby state
Receive a
matchable
tag signal
Receive a matched
tag signal and output
opening signal
Red indicator flashes
Receive the sensor's sensing signal
and output opening signal
Sensor
Tag
Wiring Instruction
COM
NO
AC/DC
12~30V
Power input
BLUE
GREEN
RED
BLACK
Relay NO
contact
Thanks for your purchasing, please refer to the following manual carefully before using.
Safety Instructions
1
Operation Instructions
Make your choice...
M-701W Electronic identity sensor
M-701W
M-701W
M-701(0)
M-701C(0)
Product Dimension
3
132 mm
72 mm
31 mm
48.7 mm
46 mm
46 mm
11 mm
38 mm
58 mm
12 mm
Installation Instruction
4
Receiver:
1. Pry and open the housing by a screwdriver along the notch on the bottom of the receiver.
2. Drill two mounting fixing holes and one cable hole according to the size drawing, in the
appropriate position on the door head where the receiver needs to be installed.
3. Fix the receiver with the provided screws bag.
4. Thread the cable through the hole with the attached cable carefully.
5. After debugging, buckle the cover tightly.
Tag:
M-701(0): Remove the screws, pry and open the housing by a screwdriver along the notch on
the side, and fasten the screws after installing the battery.
M-701C(0): Plug it into the USB port of the forklift or robot.
NOTE: Please don't install the receiver on the metal surface, or place it
behind the metal baffle, it will affect the sensing range.
Product Overall
2
Tag:
Tag's function key
Tag's operating indicator lights
Tag's operating indicator lights
Tag USB interface
Sensor:
LED indicator
Function button
Mounting
holes
Connection
terminal
Mounting
holes
Wi-Fi indicators light (Green)
Action indicator light (Blue)
Power input indicator light (Red)
Wi-Fi connection
mode
Red indicator
always on
Red indicator
flashes
Blue indicator
always on
Green indicator
flashes
Green indicator
always on
Wi-Fi connection
successfully
