Local Power
Up to 60W, 55V
(Optional)
Local Power
Up to 110W, 55V
(Optional)
Local Power
Up to 60W, 55V
(Optional)
Local Power
Up to 60W, 55V
(Optional)
QUICK INSTALL GUIDE
The FLEX Extender Kits are robust, long reach single port UTP solutions. The kit
includes a FLEX-Base, a FLEX-Link or FLEX4 adapter and a 60 Watt or 110 Watt 55V
power supply. The FLEX-Link and FLEX4, when connected to the FLEX-Base unit via
2 or 4 pair UTP can deliver 100Mbps (symmetrical full duplex) with up to 50 watts of
power with 2,000ft (610m) reach. The FLEX offering is designed specifically to
enable easy deployment over UTP for reaches beyond that of standard Ethernet
eliminating the costs and disruption associated with IDF closet requirements.
NOTE: Please see page 2 for important safety instructions
Copyright 2017 NVT Phybridge | 413-0004-1 | 2017/07 | Page 1
888.901.3633 | +44 (0) 208 977 6614 | www.nvtphybridge.com
Product Details
(NV-FLXLK-Base)
•
Paired with FLEX-Link or FLEX4
•
Up to 50W PoE
•
Local power option
•
IEEE compliant
To Switch
To Adapter
Activity
Link
Activity
Link/ Speed
Green:
100Mbps
Orange:
10Mbps
37-55V DC In
Product Details
(NV-FLXLK)
•
Paired with FLEX24, FLEX8 or FLEX-Base
•
Up to 50W PoE
•
PoE on 4 pairs
•
Local power option
•
IEEE compliant
Activity
To FLEX
To Endpoint
Activity
Link
Link/ Speed
Green:
100Mbps
Orange:
10Mbps
37-55V DC In
FLEX EXTENDER KITS
PRODUCT OVERVIEW
IP
Endpoint
To Switch
PoE over 2 or 4 Pair
UTP to 2,000ft (610m)
FLEX-Base
FLEX-Link
NOTE: FLEX-Link can be used with FLEX24 switch or FLEX-Base
1. Remove the FLEX-Base and FLEX-Link/FLEX4 from packaging.
2. Must ensure cable is properly terminated before connecting any FLEX product.
3. Remove all legacy equipment from the UTP cable infrastructure.
NOTE: In order to avoid damage to endpoints, it is important that non-IP devices are not connected when you connect the FLEX-Base.
4. Connect FLEX-Base (Switch side) to downlink port on switch.
5. Connect the Network Infrastructure cable from the FLEX-Base (Adapter side) to FLEX-Link/FLEX4 (FLEX side).
6. Using CAT5 or higher category cable, connect the endpoint to the FLEX-Link/FLEX4 (Endpoint side).
INSTALLATION STEPS
(FOR NV-FLXLK-XKIT OR NV-FLX-04-XKIT EXTENDER KITS)
4 IP
Endpoints
FLEX4
FLEX4
Long Reach PoE over UTP
FLEX-Base
Long Reach PoE over UTP
FLEX-Link
Long Reach PoE over UTP
Product Details
(NV-FLX-04)
•
Paired with FLEX-Base, FLEX8, FLEX24
•
1 uplink port and 4 downlink ports
•
Max 30W per downlink port
•
Supports IEEE compliant devices
•
Can be locally powered for additional PoE delivery
Speed
Green:
100Mbps
Orange:
10Mbps
100/ACT
10/ACT
To FLEX
To Endpoint
FLEX Extender Kit (FLEX-Link+ FLEX-Base + 60W, 55V Power Supply)
P/N: NV-FLXLK-XKIT
FLEX Extender Kit (FLEX4 + FLEX-Base + 110W, 55V Power Supply)
P/N: NV-FLX-04-XKIT
FLEX-Base
FLEX4
To Switch
PoE over 2 or 4 Pair
UTP to 2,000ft (610m)
FLEX-Base
Long Reach PoE over UTP
FLEX-Base
Product Details
(NV-FLXLK-Base)
•
Paired with FLEX-Link or FLEX4
•
Up to 50W PoE
•
Local power option
•
IEEE compliant
To Switch
To Adapter
Activity
Link
Activity
Link/ Speed
Green:
100Mbps
Orange:
10Mbps
37-55V DC In
FLEX-Link
Note: The bandwidth speed shared by the four ports (“To Endpoint”) can be determined by looking at the
LED indicators on the RJ45 connector (“To FLEX”). If the left side green LED activates, the bandwidth
available is 100Mbps. If the right side orange LED activates, the bandwidth speed available is 10Mbps.
