background image

1

4103241J-1/A

4103980D/A

28/05/2001

INTRODUCTION

This folder-inserter

 Neopost SI60

 is designed to fold your

documents, insert them into envelopes and seal the envelopes.
Small size documents may be inserted alone, without being folded.
They may also be added to larger folded documents.
The machine operation is automatic, quick and user-friendly.
The folder-inserter can be used to send very quickly invoices,
mailshots, payrolls, daily mail, etc.
The information provided in this manual will help you to optimize
the functioning and output of your machine.
Following are the folder-inserter main characteristics:

- one or two automatic feeders (at option) for large documents

(mostly A4 or “US letter” sizes),

- up to two automatic feeders (depending on the model) for small

size documents (inserts smaller than the main envelopes),

- one document manual feeder,

- very high capacity of automatic feeders providing a great

machine autonomy and a significant hourly rate,

- the possibility of inserting documents into envelopes of various

sizes including C6/5, C5, # 10.6 x 9", with or without a window,

Summary of Contents for SI60
























































































Reviews: