manualshive.com logo in svg
background image

Tabletop Patio 

Heater

Owner’s Manual

Standard: 

ANSI Z83.26-2007 / CSA 2.37-2007

 ANSI Z83.26a-2008 / CSA 2.37a-2008

Gas-Fired Outdoor Infrared Patio Heaters.

Questions, problems, missing / replacement parts? Before returning to your retailer,
call our customer service department at 1-866-814-0585, 8 a.m.-5 p.m., EST, 
Monday-Friday. 

If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. If odor continues, keep away from
    the appliance and immediately call 
    your gas supplier or fire department.

Do not store or use gasoline or
other flammable vapors and liquids
in the vicinity of this or any other
appliance.

An LP-cylinder not connected for use 
shall not be stored in the vicinity of 
this or any other appliance.

DANGER

WARNING

WARNING

For Outdoor Use Only.

CAUTION:
Installer: Leave the manual instructions
               to the user for future use.
Consumer: Please keep this manual
               for future reference.

Read the instructions before use. 
This appliance must be installed in 
accordance with such regulations as 
are in force.

Model#: SRPT03-XXXX

02/25/2011

Содержание Tabletop Patio Heater




















Отзывы: