background image

 

 

www.CondoSecure.com

 

LT-1068 Rev.0 

 

MCS-2010 Security Keypad Instructions 

 

 

To Turn on the Security System: 

 
Press 

Arm

 button. 

 
 

To Turn off the Security System:

 

 
Enter your 4-digit code 
Press your 4-digit code again to reset the ‘

STATUS

’ light if it is on, indicating Alarm Memory. 

 
 

To Change Master Code:

 

 
Press ‘

77

’ then enter your current code. 

The unit will make one long beep. 
Enter four new numbers. 
Press ‘

ARM

’ to enter or press ‘

EMERG

’ to cancel. 

If a correct code is entered and set the unit will emit 2 long beeps. (1 if canceled) 

NOTE: this must be completed within 60 seconds or the command will cancel automatically.

 

 
 

To Change AUX. Code:

 

 
Press ‘66’ then enter your current MASTER code. 
The unit will make one long beep. 
Enter four new numbers. 
Press ‘

ARM

’ to enter or press ‘

EMERG

’ to cancel. 

If a correct code is entered and set the unit will emit 2 long beeps. (1 if canceled) 
(You must know the MASTER code to change the AUX code) 

NOTE: this must be completed within 60 seconds or the command will cancel automatically.

 

 
 

To Change Entry/Exit Times:

 

 
Press ’

55

’ then enter your current MASTER code. 

The unit will emit one long beep. 
Enter the two digit ENTRY time in seconds. 
Enter the two digit EXIT time in seconds. 
Press ‘

ARM

’ to enter or press ‘

EMERG

’ to cancel. 

If a correct times are entered and set the unit will emit 2 long beeps. (1 if canceled) 
(You must know the MASTER code to change the entry/exit times) 

NOTE: this must be completed within 60 seconds or the command will cancel automatically. 
 
 
 

Reviews: