Revised 12/29/2014
Page 1
B100WOA
Fender Mounting Instructions for MIN100, MIN150, MIN1600, MIN161200, MIN1900,
MIN2200, MIN2218, MIN2260, MIN2480 & MIN9950 Fenders
STEP 1
A. Unpack all cartons and lay out parts.
B. Compare the parts with the hardware kit B100WOA as shown in Figure 1.
STEP 2
A. Measure the suspension travel. This measurement is used to determine the distance
between the fender and the wheel.
a. For air suspension systems, let the air out of the air bags.
b. For spring systems, measure from the stops on the springs to the bottom of the
frame.
NOTE:
For air suspensions with travel exceeding 6”:
In some cases a travel stop may need to be installed to prevent such large gaps
between the fenders & tires. This will help with alignment and 5
th
wheel plate clearance.
(
Please call Minimizer @ 800-248-3855 for questions regarding this issue).
B.
Gap the fenders ¾” over the maximum travel point
of the suspension system. The goal is
to make sure the fender does not rub on the tire. A gap larger than
¾” may be necessary
if using worn tires.
PART NUMBER
DESCRI PTI ON
QTY.
PB5010
5010 TAPERED BRACKET
4
131C100BSF/R
BZ
5/16-18 X 1 HEX WASHER
HEAD BL
24
I 31N150WFEZ
5/16 X 1 1/2 FENDER WASHER
24
131CNCF/RBZ
5/16-18 CLASS G FLANGE
LOCK
24
B100WOA Mounting Kit
Figure 1
