1
Step 2:
Install Software
Step 1:
Unpack Contents
Start Here
Installing your Microtek ScanMaker i280
Unpack your scanner package and check for
major components.
1. ScanMaker i280 scanner
2. Hi-Speed USB cable
3. Software CDs/DVDs
4. Power adapter
Copyright © 2013 Microtek International, Inc. http://www.microtek.com
I49-004756 B, September 2013
1
2
3
4
Important
: Do not remove the yellow stickers from
your scanner until you are told to do so. You must
install software before connecting your scanner.
Always close any open programs and turn off Anti-
virus utilities before installing software.
PC:
A.
Place the
Microtek Software CD/DVD
into a drive, and follow the on-screen
instructions to install the scanner
driver and software.
B.
Restart your computer at the end of
all software installation.
NOTE
: If the Microtek Software Installer screen
does not come up automatically, double-click
the following in succession: “My Computer”;
the CD/DVD-ROM icon; then cdsetup.exe to
start the installer program.
MAC:
A.
Place the
Microtek Software CD/DVD
(ScanPotter)
into a drive, and double-click
the
ScanPotter
installer icon to install
ScanPotter.
B.
Install the remaining software
components, then restart your computer
at the end of all software installation.
NOTE
: After rebooting your Macintosh, the Microtek
software will attempt to locate your scanner on the
system. Since this is your first install and you have
not yet connected the scanner, simply ignore the
message that appears and proceed to the next step.
