19001 Kermier Rd. Waller, TX 77484 Waller, TX 77484
www.goodmanmfg.com • www.amana-hac.com
© 2019 - 2022
Goodman Manufacturing Company, L.P.
is a registered trademark of Maytag Corporation or its related companies and is used under license. All rights reserved.
Installer: Affix all manuals
adjacent to the unit.
*MES80/*CES80
GAS FURNACE -
CATEGORY 1
CATÉGORIE I
IOG-2021H
02/2022
ATTENTION INSTALLING PERSONNEL
As a professional installer, you have an obligation to know
the product better than the customer. This includes all safety
precautions and related items.
Prior to actual installation, thoroughly familiarize yourself
with this Instruction Manual. Pay special attention to all safe-
ty warnings. Often during installation or repair, it is possible
to place yourself in a position which is more hazardous than
when the unit is in operation.
Remember, it is
your
responsibility to install the product
safely and to know it well enough to be able to instruct a
customer in its safe use.
Safety is a matter of common sense...a matter of thinking
before acting. Most dealers have a list of specific, good safe
-
ty practices...follow them.
The precautions listed in this Installation Manual are intend-
ed as supplemental to existing practices. However, if there is
a direct conflict between existing practices and the content
of this manual, the precautions listed here take precedence.
R
ECOGNIZE THIS SYMBOL
AS A SAFETY PRECAUTION
NOTE
: Please contact your distributor or our website listed
below for the applicable Specification Sheet referred to in
this manual.
These furnaces comply with requirements
embodied in the American National Standard
/ National Standard of Canada ANSI
Z21.47·CSA-2.3 Gas Fired Central Furnaces.
80% HEX
DO NOT LIFT
PRODUCT USING
HEAT EXCHANGER
Only personnel that have been trained to install, adjust,
service or repair(hereinafter, “service”) the equipment
specified in this manual should service the equipment. The
manufacturer will not be responsible for any injury or
property damage arising from improper service or service
procedures. If you service this unit, you assume responsi
-
bility for any injury or property damage which may result.
In addition, in jurisdictions that require one or more
licenses to service the equipment specified in this manual,
only licensed personnel should service the equipment.
Improper installation, adjustment, servicing or repair of
the equipment specified in this manual, or attempting to
install, adjust, service or repair the equipment specified in
this manual without proper training may result in product
damage, property damage, personal injury or death.
WARNING
WARNING
DO NOT BYPASS SAFETY DEVICES
