TP4180 • Master Equipment
PolyPro SpaTub
Operating Instructions
Parts List
A) SpaTub Basin (1)
B) Stainless-Steel Floor Grate (1)
C) Plastic Grooming Platform (1)
D) Sprayer Head (1)
E) Sprayer Hose (1)
F) Drain Cover (1)
G) Leash Hooks (2)
H) Adjustable Drainage Pipe (1)
A
B
C
D
H
E
F
G
Care Instructions:
Rinse thoroughly after bathing pet. Make sure tub is clean and dry after use. Do not use harsh or abrasive cleaners, bleach, or tools with metal or textured parts.
These can scratch or damage the tub. Check electric cord and plug for signs of damage or wear.
Operating Instructions:
1. Insert the Leash Hooks (G) into
the holes on the SpaTub Basin (A)
wall, on the side opposite the
Sprayer Head (D).
2. Attach Adjustable Drainage Pipe (H)
to the drainage system underneath
the SpaTub Basin (A). Adjust length
of Adjustable Drainage Pipe (H)
as needed.
5. Insert the Plastic Grooming
Platform (C) into the SpaTub
Basin (A) when grooming
small dogs.
6. Connect one end of the Sprayer
Hose (E) to the Sprayer Head (D)
and the other end to the tap on the
water supply (not included).
Tighten to secure.
3. Place the Stainless-Steel Floor
Grate (B) on the floor of the SpaTub
Basin (A) and then place the
Drain Cover (F) over the drain.
4. To lock the drainage system and fill
the SpaTub Basin (A) with water, lift
the drain-lock switch. To drain water
from the SpaTub Basin (A), push the
drain-lock switch down.
