KEYLESS 042
KEYLESS 042
Programming and Installation Instructions
Programming and Installation Instructions
WARNING
TO REDUCE THE RISK OF SEVERE INJURY OR
DEATH TO PERSONS:
1. READ AND FOLLOW ALL INSTALLATION INSTRUCTIONS.
2.
Locate the Keypad: (a) within sight of the door, (b) at a minimum height of 5 feet
(1.5 m) above floors, landings, steps or any other adjacent walking surface so small
children are not able to reach it, and (c) away from all moving parts of the door.
3. Activate the door ONLY when it can be seen clearly, is properly adjusted, and there
are no obstructions to the door travel.
Components:
Preparation:
1.
Locate the
LEARN
button on the operator's
On-Board Radio Receiver
, refer to Figure 1 or the operator's
Installation & Instruction Manual.
2.
Ensure that the
Rotary Selection Switch
on the operator's Electronic Control Board (ECB) is set to B2 (1),
T (4) or TS (5).
Figure 1 - Electronic Control Board (ECB)
3. Undo the screw from the bottom of the case and remove the back cover from the Keypad to install the AAA
battery, refer to Figure 2.
4.
Program the Keypad prior to mounting.
1-800-361-2260
1
TN1025 REV 4 - 2016/04/11
1,5V AAA BATTERY
2 PCS M3,5 X 20 SCREWS
AND ANCHORS
KEYPAD (TRANSMITTER)
LEARN
BUTTON
LED (WHITE)
ROTARY
SELECTION
SWITCH
ON-BOARD
RADIO
RECEIVER
BOTTOM
SCREW
INSERT
BATTERY
Figure 2 - KEYLESS042 Battery Installation
