Luminell Norway AS
• Borgundfjordvegen 16, 6017 Ålesund • Org.nr. 915 014 348 • [email protected] L0144 V1.4
This brief guide will take you through the installation of your new RLX E floodlight. For
additional in–depth product information, operation and maintenance issues, please contact
your local Luminell distributor or go online for further information. By scanning the QR code,
you will be taken you directly to our download page:
https://www.luminell.com/downloads
•
Fully assembled RLX E floodlight
•
Quick installation guide
•
Recyclable cardboard
•
Umbraco 4mm
•
Electricia
n’s screwdriver (slot)
•
2x 17mm combination spanners
•
24mm combination spanner
•
Wire stripper
•
Additional cable glands (optional)
The RLX E should be opened or dismantled by Luminell only
. The customer can, however, perform all
power connections described in the Quick Installation Guide or in the RLX User Manual without the latter
requirement being exceeded. If the terminal box has been moulded, do not open it!
To attain the long lifetime, please make sure that the heat sink on the back of the chassis has an adequate
passage to allow air to flow freely – this for the highest possible cooling performance. For outdoor
applications it is important that the external cables and cable glands point downward. If the RLX E is desired
recessed, please make sure to have at least 200 mm of free space around the unit for cooling purposes. The
steel bracket features clearance holes and angle lines offering flexibility when adjusting the light’s horizontal
and vertical direction. Loosen the bolts to pan and adjust the floodlight so that it points correctly. When
satisfied, tighten the bolts with 30 Nm torque. Shall only be installed by a qualified electrician.
CAUTION!
Crush hazard! Be
aware of moving
parts when lifting
and mounting the
floodlight. Shall only
be installed by a
qualified electrician.
1
Or personnel authorized by Luminell.
