Ltech LM-75-12-G1A2, Quick Start Manual

Page: 1 / 7

1
L-N:2KV
3600Hz
LM-75-12-G1A2 LM-75-24-G1A2
(Constant Voltage)
Intelligent LED Driver
Digital
Dimming
Over - heat
Protection
V
Over voltage
protection
Short Circuit
Protection
Over
Load
Protection
www.ltech-led.com
Specification
OUTPUT
Model
INPUT
ENVIRONMENT
PROTECTION
SAFETY
&
EMC
OTHERS
Dimension
Packing
Weight(G.W.)
Withstand Voltage
Isolation Resistance
Safety Standards
EMC Emission
EMC Immunity
Strobe Test Standard
Over-heat Protection
Over Load Protection
Short Circuit Protection
Leakage Current
Control surge capability
Inrush Current(typ.)
Efficiency (typ.)
Power Factor
Input Current
Frequency
Input Voltage
Dimming Interface
Ripple & Noise
PWM Frequency
Dimming Range
Working Temperature
Working Humidity
Storage Temp., Humidity
Temp. Coefficient
Vibration
Strobe Level
THD
Output Voltage Range
Output Voltage
Output Current
Output Power Range
Output Power
Overload Power Limitation
Over Voltage Protection
Shut down automatically if short circuit occurs, auto recovers.
Shut down the output when current load
≥
102%, auto recovers.
Shut down the output when non-load voltage
≥
13V, re-power on to recover after fault
condition is removed
Shut down the output when non-load voltage
≥
26V, re-power on to recover after fault condition
is removed
293×43×30mm(L×W×H)
296×44×33mm(L×W×H)
300g±10g
IEEE 1789
I/P-O/P: 3750Vac
I/P-O/P: 100MΩ/500VDC/25°C/70%RH
EN 61000-4-2,3,4,5,6,8,11 EN 61547
20 ~ 95%RH, non-condensing
-40°C ~ 80°C, 10~95%RH
±0.03%/°C (0-50°C)
10~500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes
12Vdc 24Vdc
12Vdc ±0.5Vdc 24Vdc ±0.5Vdc
Max. 6.25A Max. 3.125A
Max. 75W
0~75W
High frequency exemption level.
≥
102%
≤
200 mV
≤
300 mV
220-240Vac
50/60Hz
Max. 0.4A/230Vac
PF>0.97/230Vac, at full load
≤
14% at 230Vac, at full load
≤
12% at 230Vac, at full load
91% 92%
Cold start 30A at 230Vac Cold start 45A at 230Vac
Max. 0.5mA
ta: -20°C ~ 50°C tc: 80°C
dimming depth: Max. 0.1%
0~100%,
0-10V
Push DIM
0-10V(1-10V/10V PWM/RX), Push DIM
The driver is suitable for connecting resistor current-limiting LED fixture (e.g. LED strip). The inrush current will be dozens of times increased if connecting built-in constant current IC current-limiting LED fixtures,
the driver will activate the overloaded protection (hiccups flickering). When you order, please remark controlling the constant current LED fixture (e.g. MR16 lamp, underground light, LED wall washer, constant current
LED strip, etc.), then we can prepare the special programs.
LM-100-24-G1A2
Max. 0 . 5A/230Vac
93%
PF>0.98/230Vac, at full load
Max. 4.17A
Max . 100W
0
~
100W
Intelligently adjusting or turning off the output current if the PCB temperature
≥
110°C, auto recovers
High frequency exemption level
Flicker-Free
IEEE 1789
5
in
1
dimming
0-10V
1-10V
10V PWM
RX
Push DIM
Ultra-low consumption of 0-10V ports: < 0.05mA.
Push DIM
0-10V
LM-75-12-G1A2 LM-75-24-G1A2 LM-100-24-G1A2
CCC China GB19510.1, GB19510.14
CB CB member states IEC61347-1, IEC61347-2-13
RCM Australia AS 61347-1, AS 61347-2-13
UKCA Britain BS EN 61347-2-13:2014+A1:2017, BS EN 61347-1:2015+A1:2021
TUV Germany EN 61347-1, EN 61347-2-13, EN 62493
CE European Union EN 61347-1, EN 61347-2-13, EN 62384
CCC GB/T 17743, GB 17625.1
RCM EN 55015, EN 61000-3-2, EN 61000-3-3, EN 61547
BS EN IEC 55015:2019/A11:2020, BS EN 61547:2009, BS EN IEC 61000-3-2:2019, BS EN 61000-3-3:2013/A1:2019 UKCA
EN 55015, EN 61000-3-2, EN 61000-3-3, EN 61547 CE
China
Australia
Britain
European Union
Small size and light weight. The housing is made from V0 flame retardant PC
materials from SAMSUNG/COVESTRO.
The clamshell design and screwless type for strain-relief. The design of
dismountable end cap allows you to adjust the length of housing depending
on your needs.
. Dimming interface: 0-10V(1-10V/10V PWM/RX), Push DIM
Automatic recognition of 0-10V, 1-10V input signal.
Dimming from 0~100%, down to 0.1%.
With soft-on and fade-in dimming function, enhancing your visual comfort.
High frequency exemption level.
Ultra-low consumption of 0-10V ports: < 0.05mA.
Overheat, over voltage, overload, short circuit protection and automatic recovery.
Innovative thermal management technology intelligently protects the life of the
LED driver.
Up to 50,000-hour life time.
5-year warranty (Rubycon capacitor).