Elite Model, 1, 2, 3, Pickle 2
TS
–
My Elevation Is Not Working
Author: CT
Contributors: JR,RR, JJ
Orig. date: 9/20/10
Revised:12/15/2021
Objective
: To troubleshoot elevation issues for Elite EL01, EL02, EL03, EL0P2
Action
Pictures
1
To troubleshoot elevation issues for the EL01, EL02, and
EL03, and EL0P2 follow steps below.
Section 2,3. `´´Checking elevation Motor´´
(Go to this section if the elevation is not moving at all, or
moving in 1 direction, or moving just a little).
Section 4 ´´6 Flashing lights´´
(Go to this section if the Charged/Charging LED is giving 6
flashing lights, then a pause and then 6 flashing lights).
Section 5,6 ´´Removing Red Case´´
(Go to this section if the elevation moves freely and there is no
resistance on the motor itself).
For troubleshooting elevation issues with a Grand Series
machine (EL04, EL05, EL05 LE) see Troubleshooting
Grand Error Messages
2
Checking Elevation Motor
1. Unscrew control panel and pull it out
and to the side. Be careful not to
disconnect any additional wires.
2. Switch the elevation and feed
connections on the green electronic
board on the back of the control panel.
3. Turn on machine and press either
direction of the elevation button. If the
feed wheel does not turn this control
panel is failing, a new control panel
(EL41B, EL41, EL42, EL43, EL52.P2)
is needed.
If the elevation is still not moving, please move onto the next
Control Panel – Open
Elevation & Feed Connections
