CAUTION: Please read these instructions before installing the luminaire.
To avoid electric shock, turn off the power from the
electric panel before beginning. For safety, this
luminaire must be grounded. Consult an electrician to make sure all the requirements of the US or Canadian Code for electricity and the current local regulations comply.
Keep these
instructions as reference
.
Installation Instructions for Surface LED
Colorwash Luminaire
Note 1: This portable luminaire (Fig.1) uses LED (light emitting diode lamps), which require no maintenance. Designed for residential, commercial and industrial applications, non
hazardous dry locations, ceiling (Fig.2), wall-mounted (Fig.3) and floor applications (Fig.4).
Note 2 : This portable luminaire includes a 96 in. extension cord and can also be hardwired using flexible metal conduit (Fig.5), two 3/8 in. connectors are supplied.
A. OPTICAL ASSEMBLY ADJUSTMENT:
1. Adjust
head on
assembly at the desired angle. (Fig.6)
2. Lock in place inserting
locking screws
through
hinge
. (Fig.7)
Note: Use a 3/16 in. Allen key (not supplied).
B. CEILING or WALL MOUNT INSTALLATION:
(Fig.2)
Note: Provide anchors to support 8 lb (3.6kg) luminaire.
For ceiling mount
1. Install 2
anchors
at 20-1/2 in. (520mm) from
luminaire
center. (Fig.8)
Note: For more stability, install 4 anchors 2 in. from center of the luminaire.
(Fig.9)
For wall mount
1. Mount 2
anchors
15 in. (381mm) apart. (Fig.12)
2. Determine light beam orientation (uplight or downlight). (Fig.3a & 3b)
3. Loosen
screw
from the
mounting tabs
. (Fig.10 & 11)
4. Rotate and position
oblong holes
located at each end. (Fig.11)
5. Locate
embossed holes
and screw in place. (Fig.10 & 11)
6. Install
screws
(not provided) through
oblong holes
. (Fig.8 & 9)
D. FLOOR INSTALLATION:
1. Position
mounting tabs
towards front of the luminaire (for stable floor standing),
or at each end. (Fig.10 & 11)
2. Loosen
screw
from the
mounting tabs.
(Fig.10 & 11)
3. For more stability depending on optical assembly orientation, secure with 2
screws from each end of assembly (optional). (Fig. 9 & 12)
4. Locate
embossed holes
and screw in place. (Fig.10 & 11)
5. Install
screws
through
oblong holes.
(Fig.12)
LOCKING
SCREW
HINGE
ALLAN KEY
FIG.7
HEAD ON
FIG.6
FIG.8
FIG.9
FIG.10
FIG.11
ANCHOR
LUMINAIRE
LUMINAIRE
EMBOSSED
SCREW
MOUNTING
TAB
HOLE
SCREW
MOUNTING TAB
FIG.1
Portatif ColorWash
Ceiling
Wall
Floor
Daisy Chain
FIG.2
FIG.3a
FIG.4
FIG.5
FIG.3b
Lightolier is a Philips group brand
IS:LLACSW
Page 1 of 2
10-08/Rev-01
