ML Accessories Limited
LU5 5TA
www.mlaccessories.co.uk
07/2013_V2
ø90mm
A.
Cut a hole 90 mm diameter in the decking
or board ensuring it does not infringe with
any gas/water pipes or electrical cables that
may be hidden below the surface.
B.
With the 4 x machine screws (supplied) fix
the 2 x spring clips (supplied) to the body.
Ensure the clips are pointing out
C.
Connect the pre-installed flexible cable to
a suitable joint box ensuring correct polarity
is observed.
BROWN- LIVE. BLUE-NEUTRAL.
The joint box must be IP65 or above rated if
used externally or underground
D.
Finally, push the fitting into the decking or
board
Check for correct operation.
DECKING INSTALLATION
LN
LN
A
B
C
D
PLEASE NOTE: IF CABLE IS BURIED UNDERGROUND IT IS ADVISED THAT A
SUITABLE NON -CORROSIVE CONDUIT IS USED.
INSTALLATION & MAINTENANCE MANUAL
LEDM08B - LEDM08W
230V
50Hz
IP
6
5
dim
02
IP65 LED RECESSED LUMINAIRE
LEDM08B_LEDM08W_INSTRUCTIONS_Layout 1 15/11/2013 09:54 Page 1
