Page
1
from
4
923193601_09_008
GENERAL
T h e s e l u m i n a i r e s a r e u s e d w h e r e
emergency light is needed. Each luminaire
must be permanently connected to the
mains power supply
.
In normal operation
the battery is charging, the green LED and
2 yellow LED’s light in non-maintained
operation. The green LED and the LED
strip light in maintained operation
.
In case
of a mains power supply failure the
l u m i n a i r e w i l l l i g h t t h e L E D s t r i p
automatically in emergency mode. When
the mains power supply is restored the
device turns to normal operation.
Non maintained / maintained operation
There is an option to select the non-
maintained or maintained operation by
placing the jumper to the appropriate place
(page 2)
.
INSTALLATION
To install the luminaire follow the installation
instructions on page 2.
ΑΤΤΕΝΤΙΟΝ
!
!!
1. Operations for installation, maintainance
or testing must be done by authorized
personnel only
.
2. The
luminaire
must be connected to the
m a i n s p o w e r s u p p l y t h r o u g h a f u s e
dependent on the total amount of the line’s
power load.
3. It is sug
g
ested to check every month the
indication LED for battery charging, and by
placing the test card
(page 3) an
(
A-1900)
operation test is initiated, to check the
emergency cirquit. The illumination source
should light as long as the card is present
.
In the opposite condition contact the
installer.
4. It is sug
g
ested to check every 6 months
the minimum autononous duration by
disconnecting the mains power supply.
Count the time that the led strip lights and
in case of less time than the minimum
autonomous duration the battery must be
r e p l a c e d . I f t h e m e a s u r e d t i m e i s
considerably less than the minimum
autonomous duration
contact the installer.
In case of battery or led strip replacement,
WATERPROOF NON MAINTAINED / MAINTAINED EMERGENCY LUMINAIRES WITH WHITE LEDs
220-240V AC/50-60Hz
3.3W/3
.5
VA
TECHNICAL CHARACTERISTICS
(for LED MODULE Specs see page 4)
OPERATION TEMPERATURE RANGE
RELATIVE HUMIDITY
EXTERNAL DIMENSIONS
CONSTRUCTION MATERIALS
TYPICAL WEIGHT
GUARANTEE
OPERATION VOLTAGE
MAXIMUM POWER CONSUMPTION
BATTERIES (Ni-Cd)
CHARGING TIME
INDICATIONS
BATTERY PROTECTION
MINIMUM AUTONOMOUS DURATION
DEGREES OF COVER PROTECTION
PRODUCED IN ACCORDANCE WITH
ILLUMINATION (MAINS / EMERGENCY)
ILLUMINATION SOURCE
90min
24h
Charge indication LED
From overcharge and deep discharge
IP65
3.6V/3Ah
40lm / 210lm
30 white LEDs
EN 60598-1, EN 60598-2-22
, ΕΝ 55015, ΕΝ 61547, ΕΝ 61000-3-2, ΕΝ 61000-3-3
o
5 to 40 C
Up to 95%
3 years
(1
year for the battery
)
810gr.
3.1W/3
.3
VA
3.6V/
0.6
Ah
40lm / 105lm
15 white LEDs
180min
4.5W/4.8VA
3.4W/3
.6
VA
3.6V/1.5Ah
40lm / 105lm
30 white LEDs
40lm / 210lm
15 white LEDs
630gr.
710gr.
313 x 118 x 66 mm
Bayblend FR3010
,
transparent
polycarbonate
Thank you for your trust in our products.
Olympia Electronics - European manufacturer
.
GR-1935/15L
GR-1936/15L
GR-1936/30L
GR-1935/30L
