Installation Instructions for Corvus Range
IP
65
LED Non-corrosive Luminaires
Operating Conditions:
These Luminaires are suitable for a temperature range of to -
20
°C to
40
°C.
INSTALLATION & OPERATION
Do not drill the body for mounting purposes.
D
rilling the body will invalidate the warranty, ONLY use the fixing methods provided. Please ensure that the rated
voltage and frequency of the luminaire is compatible with the supply.
Disconnect the power supply before installation.
Description
Length
(mm)
Clips
Qty
40
W
Single
1565
12
2
x
40
W
Twin
1565
12
48
W
Single
1835
14
2
x
48
W
Twin
1835
14
Mains Cable
Lock Nut
Dia:
1
2
. Assemble the clips at the designated position.
See Dia:
2
.
Dia:
2
1
. Fix the cable gland into the pre drilled hole in
the base. See Dia:
1
.
3
. Fix the two ends of the cover and base first.
See Dia:
3
.
4
. The fixing centre points for this luminaire are
located on the mounting bracket. Choose a
suitable location and fix the mounting brackets,
using the wall plugs, screws and washers
provided.
Dia:
4
Fixing Centres
Dia:
3
Model Numbers:
ACPLED15, ACPLED25, ACPLED16 & ACPLED26
Important Safety Instructions
• Please read these instructions carefully before installation and keep safe for future reference.
• This unit should be installed by a competent person and in accordance with the current IET Wiring
Regulations.
If in doubt, consult a qualified electrician.
• Always turn off the supply before commencing work.
• This appliance must be earthed.
• All luminaires are complete with electronic ballast.
S pecification:
