Kason 10058E Series Installation Instructions Download

Page: 1 / 3

0058E Security Latch with Electric Flush Strike

Part Number: 10058E*

INSTALLATION INSTRUCTIONS

User must supply hardware to mount:

• Strike Plate: (6) 1/4” hex screws
• Latch: (4) 1/4” flat head screws
• Latch Cover: (4) #10 screws with T27 type tamper-resistant

torx drive

Note:

Retrofit kit available for through bolting when no structure

exists in the door or jamb to securely attach components.

Note:

The 0058 Latch requires one of the following Inside Releases:

0481C, 0481SC, 0482C, 0486C, 0487C, 0488C, 0489C

STEP 1

STEP 2

Install 0058E latch on spacer plate and mount to door making
sure it is flush with the edge of the door.

• Center strike plate on 0058E latch
• Mark center of 4 slots
• Install (4) 1/4” mounting screws (not included)

Note:

Do not fully tighten screws in slots and adjust plate

to approx. 1-3/16” for initial setup

Summary of Contents for 10058E Series

Page 1: ...rofit kit available for through bolting when no structure exists in the door or jamb to securely attach components Note The 0058 Latch requires one of the following Inside Releases 0481C 0481SC 0482C...

Page 2: ...ction with latch tongue extra holes can be used to lock position of base plate Install insert and place cover in place as shown Step 6 Check for proper fit of cover around edges of strike Adjust the s...

Page 3: ...Electric Flush Strike Part Number 10058E INSTALLATION INSTRUCTIONS STEP 6 STEP 7 Install insert into installed latch space as shown Install latch cover and secure to the door using tamper resistant sc...