![background image](http://html.mh-extra.com/html/juniper/ex8208/ex8208_mounting_2032465001.webp)
Mounting an EX8208 Switch on a Rack or Cabinet Using a Mechanical Lift
Because of the switch's size and weight, we strongly recommend using a mechanical
lift to install the switch.
NOTE:
For instructions on installing a switch without using a mechanical lift, see
Mounting an EX8208 Switch on a Rack or Cabinet Without Using a Mechanical Lift.
CAUTION:
Do not install line cards in the chassis until after you mount the chassis
securely on a rack or cabinet.
CAUTION:
Before front-mounting the switch on a rack or cabinet, have a qualified
technician verify that the rack or cabinet is strong enough to support the switch's
weight and is adequately supported at the installation site.
Before you install the switch:
■
Prepare the site for installation as described in Site Preparation Checklist for an
EX8200 Switch.
■
Ensure the site has adequate clearance for both airflow and hardware
maintenance as described in Clearance Requirements for Airflow and Hardware
Maintenance for an EX8208 Switch.
■
Unpack the switch as described in Unpacking an EX8200 Switch.
■
In a two-post rack, install the power cord tray at the desired position (see Installing
the Power Cord Tray in a Rack or Cabinet for an EX8200 Switch). The lip of the
power cord tray will support the front of the chassis when you install the switch
in the two-post rack.
■
In a four-post rack, install the adjustable mounting brackets at the desired position
(see Installing Adjustable Mounting Brackets in a Rack or Cabinet for an EX8200
Switch). Optionally, you can also install the power cord tray and use it to manage
the power supply cords.
■
Review chassis lifting guidelines described in Chassis Lifting Guidelines for EX8200
Switches.
Ensure that you have the following parts and tools available to install the switch:
■
A mechanical lift
■
24 mounting screws appropriate for your rack
■
A Phillips (+) screwdriver, number 2 or number 3, depending on the size of
your rack mounting screws
Mounting an EX8208 Switch on a Rack or Cabinet Using a Mechanical Lift
■
1