background image

USER GUIDE AND WARRANTY INFORMATION

www.jamaudio.com

HX-HP420

Where There’s A Jam, There’s A Party!

READ UP.

PARTY DOWN.

HEY. HAVE WE SEEN YOU HERE BEFORE?

 

PACKAGE CONTENTS

 

Register your headphones at www.jamaudio.com. 

Information about where you bought them and how you’re 
using them is like gold for the people who make these 
headphones. Do them a solid, will ya?

Por manual de instrucciones e información de garantía 
en español visítenos en www.jamaudio.com

There are lots of cool Jam speakers.

 

Check them all out at 

www.jamaudio.com

Charging the headphones is so easy you’ve probably 
figured it out by now, but just in case, 
you’ve got two options: You can charge
it using your computer or a wall outlet.
1.  The cord that came with the 

headphones —the one with the USB on 
one end and the Micro USB on the 
other—is made to work with your computer. 

2.  If you want to use the wall outlet, you’ll 

need to pick up a power cord with a 
Micro USB the next time you’re at the 
store, or use any USB AC adapter (DC 5V 
+/– 0.25V rated current: >250mA), including 
the one for your cell. 

Plug it in and your headphones will be ready for an epic night 

in no time. You should go get ready too! They need about 3 

hours for 11 hours of party time. 

Headphones

Packaging doubles 

as carrying case

User Manual

Charging Cord

1.  This is the power button, press and hold for 5 seconds to 

power on. Push it to play, push it again to pause

2.  Turn the music up or down (Wait, why would you turn 

it down?)

3.  The power cord goes here

4.  Skip back a track or jam on to the next song

5.  This light lets you know when Bluetooth is paired with 

your headphones

6.  Check out how much juice is in the battery 

Like any amazing couple, this one starts with a connection 
—one between your device and the headphone’s Bluetooth.
1. We know you’re probably going to think, “derp” with this 

one, but we have to say it: Make sure the smartphone, 
tablet or computer you want to hook up to the headphones 
has Bluetooth. (There. We got that out of the way.)  

2. Turn on the headphones and look for the little blinking light.

3. Do whatever your device needs you to do on its end. 

(We don’t know what you’re using. We’re not spies.)

4. Look for Jam Transit Headphones in your device’s 

Bluetooth list or click YES—whatever pops up on your 
device—and BAM! you’re connected.

5. Now hit PLAY on your headphones and crank it up—or 

down if you’re lame.

You’re probably only going to have to do this once, unless 
your device goes through a major I-just-dropped-it-in-the-
pool kind of reboot. The device and Bluetooth will find each 
 other every time just as long as the headphones are set to
 Bluetooth and your device’s Bluetooth is, you know—on
If you’re connecting to a computer, you may have some extra 
steps on that end. You’ll have to get that information from the 
computer company.

Depending on your device you may be prompted to enter 
a pairing code. If prompted enter “

0000

” as the code. 

Press and hold the +/– button for 5 seconds to activate 
pairing mode.
Note: If you turn on your Transit Headphones but haven’t 
started the party, they will automatically power off after 2 
minutes of unpaired inactivity. 

JUST CHARGE IT

Wall adapter 
not included

CONTROL YOUR DESTINY…OR AT LEAST YOUR

HEADPHONES 

FEATURES:

3

5

2

6

1

4

ALLOW US TO SHED SOME LIGHT

BLUETOOTH

®

 CONNECTION: IT’S A SETUP

Flashing Red

What It Looks Like

CHARGE

What It Means

Low Battery

RED (when plugged in)

Charging

LED OFF (full charged)

Ready to Party

Quick Flash BLUE/RED

Pairing Mode

Slow Flash BLUE

Connected

When friends call to interrupt your party of one—and you know 
they will—answer the phone without disconnecting from your 
JAM Transit. Yes, that’s right. Your headphones are a 
speakerphone too. How amazing is that?

Here’s how it works:

1. Make sure your phone and headphones are connected 

through Bluetooth.

HELLO? SPEAKERPHONE? YES! 

2. Answering and ending a call works the same way: 

simply click the PLAY/PAUSE button on your Transit.

3. If you’d rather not talk, hold down the PLAY/PAUSE 

button on your Transit for three seconds to ignore the 
call.

THE COOLEST PART: 

The Transit knows when a call is 

coming in and pauses the music before ringing. When you 
hang up, the music starts where it left off—and so does 

the party. If it’s you making the call, just start dialing from 
your phone, and the Transit automatically does its 
hands-free thing. Isn’t it refreshing to know your 
headphones totally get you?

FACING IS 2.8” X 1.3”

FULL SHEET IS 5.6”W X 10.84H”

Reviews: