background image

M3

 STROLLERS

 

Keep this manual for future reference. If you sell this stroller or

 

give it away, make sure you give this manual to the new owner.

 

Ask them to read instructions completely.  

 

Operating Instructions

 

Important:

Read and follow these Safety Rules and Assembly Instructions before operating stroller. If 

you have any     questions concerning the safe use of this product, contact Pacific Cycle  LLC at           
1-800-242-6110, M-F, 8:00 a.m. – 5:00 p.m. C.T. or visit our website at www.instep.net. 

 

Safety Rules:

 

WARNING: Failure to follow these warnings and assembly instructions could result in 
serious injury or death.

 

Immediately discard any plastic wrapping.

 

Never allow children to fold, assemble, or disassemble the stroller.

 

Maximum weight capacity for the Single stroller is 50 lbs. or 22.7 kg. Excessive weight may cause a 
hazardous, unstable condition if this load is exceeded. Maximum height of the child shall not exceed 38" 
or 96 cm.

 

Never place child in stroller with their head forward and feet rearward.

 

Avoid serious injury from falling or sliding out. Always use seat belt.

 

Never leave child unattended.

 

Never use this stroller with roller or in-line skates.

 

Never allow stroller to be used as a toy or allow children to give rides to others.

 

Never use stroller if it becomes damaged.

 

Always be aware of traffic around you when walking.

 

Always engage brakes when you stop or when you let go of handle.

 

Accessories or parcels placed in or on the stroller may cause it to become unstable.

 

Maximum weight for objects in bottom basket is 5 lbs. or 2.2 kg. Excessive weight may cause a         
hazardous, unstable  condition.

 

Maximum weight for objects in rear zippered pouch is 1 lb. or .45 kg. Excessive weight may cause a 
hazardous, unstable condition

 

To avoid burns, never put hot liquids in the parent or child tray. To prevent tipping over do not place 
more than 2 lbs. or 1 kg on either the parent or child tray.

 

Child may slip into leg openings and strangle. Never use in a reclined carriage position unless T-shield/
waist strap placement has been readjusted.

 

Care must be taken when folding and unfolding the product to prevent finger entrapment

.

 

 

 

IMPORTANT

 

We appreciate your purchase of one of our many fine products. We are sure that you will be satisfied 
with your selection. We regret that although great care and effort have been taken, occasionally       
problems may occur. PLEASE DO NOT RETURN PRODUCT TO THE STORE. To ensure prompt and 
correct handling of problems, or to answer questions, please contact us at either our Toll-Free Customer 
Service number or E-mail us at our address listed below. Service will be quicker if you have your model 
number (found on the product and box) along with this instruction sheet ready when calling. If you have 
any questions concerning the safe use of this product, please

 

contact us at 1-800-242-6110, and follow the prompts to our customer service representative, or E-mail 
us at [email protected] or visit our website at www.instep.net

 

Tires are shipped deflated, DO NOT OVERINFLATE. Please inflate slowly, with short bursts, to 30-35 
PSI maximum. 30 PSI will provide a comfortable ride for your child

 

Summary of Contents for M3







Reviews: